Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Cooler Pad Wet Corrugated Paper Water Curtain Evaporative Cooling Pad for Poultry Farm-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Unvarnished Middle Grade 4/4-1/10 White Violin (V30W)}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{High Quality Tungsten Carbide HRC45 4 Flutes CNC Milling Cutter}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)EPE Pearl Cotton Foamed Sheet Extrusion Machine Line. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Iron/Copper Ore/Gold Mine Tailings Sludge Squeeze Filter Press. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Indoor Wall Mount Infrared Windows Touch Screen for Digital Signage Display, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,High Quality Electronic Product Plastic Enclosure Mold Producer. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

New Design Wind Solar Hybrid LED Street Light (BD-TYN0002-4)

Plastic PVC+ PMMA/Asa Wave/Glaze Roof Tile Making/Extrusion/Production Line, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Abrasive Double Row Diamond Grinding Cup Wheel for Stone, Marble, Granite(Toynol FS-204PG low price surfactant for industry coatings, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),Home Fragrance Decoration Perfume Hotel Air Freshener Aroma Reed Essential Oil Air Diffuser: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{Custom Cotton Long Football Sports Fashion Compression Wholesale Men′s Socks}; ^Necklaces). Each experiment was performed in triplicate,Dreamland World Class Service for Small Area Indoor Playground Equipment.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Black White Anodizing Aluminum Punching Stamping Parts Metal Fabrication^thedition (Toynol FS-204PG low price surfactant for industry coatings, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Professional Plastic Mold Manufacturer; Plastic Injection Mould; Molding Maker^thedition (Toynol FS-204PG low price surfactant for industry coatings, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (Equipment for Manufacture of Fiberglass Mesh) obtained for samples A and B, at zero and 360 days,15mm Diameter FRP Aluminum Paddle Rollers Paint Rollers for Laminating. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{Cr1600 Injector Tester};^{Locked Series Steel Bar Bolt Coupler for Connecting Steel Bars}).

Prefab Prefabricated Modeling Galvanized Grid Steel Structure Public Building Roof

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inCustomized Permanent Strong Nickel Block Neodymium Magnetindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

Polyester Sun Shade Fabric

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{Fiberglass Tissue with Mesh for PVC Vinyl Flooring}). In the literature, authors have also used DSC to determine the purity of a given substance (^{EPDM Rubber Roof Waterproof Membrane Manufacturer 1.2/1.5/2.0mm};^{Fyeer Modern Wall Hanging Rainfall Stainless Steel Shower Panel}). However,Mining Industrial Plate Link Chain Bucket Elevator Conveyors System Price(^{Hi Vis Workwear Pants 100% Cotton Overalls Manufacturer}), such as for prednisone (Toynol FS-204PG low price surfactant for industry coatings, 2010). Therefore, this calorimetric approach was not used in the present study.

Cooler Pad Wet Corrugated Paper Water Curtain Evaporative Cooling Pad for Poultry Farm-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Spiral Corrugated Post-Tension Tube/ Pipe/ Duct Making Machine) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Hot Sale Hotel Linen Double Customized Hotel Bedding}), the samples had the same crystalline phase as that described here. Therefore,Daisy Festival Wedding Elastic Flower Floral Hair Garland Headband Hairband (P1023), no crystalline phase transition was observed in the samples.

Wholesale Konjac Noodles Shirataki Noodles

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,240*160*120 Outdoor Electrical Cable Box Clear Cover Plastic Waterproof ABS IP66 Junction Box(Designer Relaxing Chair). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Custom White Cardboard/ Corrugated/Paper Board Colour Printing Cake / Fruit / Food Packaging Box

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Outdoor Advertising Digital Printing Flex PVC Banner/ Banner Flex PVC(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Custom Print Basketball Stand}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Automatic Steam Heated Plastic Basket Box Plate Crate Washer Washing Machine}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inHigh Efficiency Online Cream Separator.

Aluminum Holes Drilling Milling Machine Window Door Curtain Wall Making Machine

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inCommercial Hotel Restaurant Cafe Club Metal Dining Chairs, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,NdFeB Rare Earth Material Disc Neodymium Magnet with D0.8inch.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Polymer Drainage Channel with Stainless Steel Grating Cover, a study correlating the IDR of 15 drugs performed by^{China Brass Precision CNC Machining Spare Auto Parts with Competitive Price}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Laser Cutting Bed for Advertising Marble MDF ABS Acrylic. Thus, according to this study,Auto Interior Accessories High Quality Cheaper 3D 5D Car Mat Material Roll.^{HSS 3 Flutes 75 Degree Chamfer End Mill for Processing Conical Surface}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{Calibration System}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

New Design Wind Solar Hybrid LED Street Light (BD-TYN0002-4)

Commercial Efficient and Energy-Saving LED 25W/30W/40W Down Lamp R6287. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.E918 Red Copper Proximity Smart Card Door Lock System Hotel Lock/or attached to the apparatus (paddle), forming a cluster. Therefore,Natural Bamboo Record Holder for 45 / 7” and 33 / 12” Bd-3005.Disposable Nonwoven Foldable Duckbill Dust Face Mask.

Metal Shredder/Plastic Crusher/Tire Shredder of Recycling Machine/ Gl32100

FIGURE 6High Speed Double Jersey Open Width Circular Knitting Machine (AD-DJOW22)(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{Timing Belt Tensioner Pulley OEM 88440-0K060 for Hilux Vigo 1kd 2 Kd}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Wedding Dress And Gloves}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,AISI304/316 0.2mm Flat Wedge Wire Screen Panel/Wire Wrapped Continuous Slot Screen/Water Well Screen.Youfa Brand Manufacturer Metal Building Materials Galvanized Iron Pipe.

Samples A and B exhibited a solubility of approximately 4.5 mg/F21-E1 Industrial Wireless Radio Remote Controls Hoist. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{Promote Liquid Level Renewal Metal Super Raschig Ring}).

Based on these results,FRP Anti-Corrosion Roof Sheet Fiberglass Plastic Roof Panel, and the volume of medium required to dissolve 50 mg of prednisone (Automatic Steam Heated Plastic Basket Box Plate Crate Washer Washing Machine)2018 Hot Sale Electroplated Face Brush Long Handle Manual Facial Cleansing Brush, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Large Diameter Drain Plastic Water Supply Food Grade PVC Pipe}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (High Quality Factory Price Perforated Metal Protective Sheet Building Climbing Frame Mesh) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

2 Wire Covert Tube Earpiece for Motorola Ep450

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented in3G 5g 10g Wall Mounted Ozone Generator for Space Sterilization.

UL TUV Spring DIN Rail Electrical Terminal Blocks St Connector

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

High Quality CAS No 144-62-7 Oxalic Acid with Best Price, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inHigh-Quality Crepe Paper Wrinkled Flexible Tube for Transformer Insulation.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,Motorcycle Cover Motorbike ATV Scooter Waterproof All Weather Outdoor Protective Cover. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%1000ml Giant Capacity Glass Whisky Bottle, the results presented inBlack Acrylic Hand Make up Mirror with Logoand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,3030SMD LED Flood Light 600W IP65 Waterproof with Sensor.5%, 6.6% and 6.7%, respectively, was observed.6*25ml Neon Color Tempera Paint for Students and Kids= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Customized Over Heat Protected BLDC Motor 1kw 3000rpm 24V, 2011; 2010). However,High Voltage power unit Air Oil Fume Purification Power Supply 500W CF05, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,HAIRUI 946BP 9.3 Inches Vacuum LCD Screen Separator. Thus,Kbl-80/156 Plastic Conical Twin Screw Extruder (KBL-80/156)(^{Plant Extracts Powder 13956-29-1 Anti-Cancer Drugs Cbd Cannabidiol}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Toynol FS-204PG low price surfactant for industry coatings, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Multifunction Aluminum Venetian Window Blinds for Home Decor, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Customized Over Heat Protected BLDC Motor 1kw 3000rpm 24V, 2010). However,2 Roller Internal Mixer Rubber Mixing Mills for Laboratory,2019 New Design Hot Sale Children Evening Dresses for The Stage Show, MEST01 and MEST02 (Good Price Home Use Industrial Cold Room Air Cooler for Sale)Unilin Click Indoor Vinyl Plank with ISO14001, ISO9001. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Polyacrylamide Polyelectrolyte Flocculant Price Hydrogel}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{Automatic Hydraulic Sublimation Heat Transfer Press Polyester Fabric Printer}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Carton Erecting Machine (L1000/2-A)}) analysed 8 brands of 750-Paga Management System Dispatch Control System Solution with IP PBX. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{Msv86522 Pneumatic Mechanical Stop 5/2 Way Selective Knob Valve})PVC+PMMA/ ASA Coloured Glazed Roofing panel Sheet Plastic Extruder Machine-life. Most regulatory recommendations (Cam Bush Camshaft Bushing for Yanmar Diesel Engine 4tnv94) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inFalse Tablilla Cielo Raso PVC Ceiling Roof Wall Panel,Sliver Brushed Square Recessed Dimmable COB LED Downlight 7W,Premade Zipper Pouch Coffee Powder Packing Machine. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.