Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Real Wood Phone Case Full 360 Degree Protective Cell Phone Back Covers-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Cheap Dissolved Air Flotation Machine for Dairy and Milk Processing}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{Custom Woven Label Terry Cotton Wristband}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)High Quality White Rose Granite Countertop Vanity Top for Kitchen Bathroom. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Good Price Home Use Industrial Cold Room Air Cooler for Sale. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Em4305 Chip Mango Proximity Card Access RFID Thick Card, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,RFID Reader and Snapshot Camera Vehicle GPS Tracker Device GPS105A for Fleet Management. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Aluminium Bronze C95800 Metal Seat Butterfly Valve for Sea Water

3mm/0.15mm Non-Combustible Aluminum Composite Panel for Partitions, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.110V-240VAC 50Hz/60Hz Pure Sine Wave Inverter 1kw - 12kw with LCD / LED Display and Transformer(High Value Orchid Production Commercial Glass Greenhouse, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),PVC Self Adhesive Cold Laminating Film Best Price: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{4.3 Inch Touch LCD Display Module Naked Industrial Tablet PC Computer};^{Best Design Durable Automatic H Type Battery Layer Chicken Cages}). Each experiment was performed in triplicate,Waterproof Human Body Mercury-Free Glass Thermometers.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Ruifeng Plywood Production Line with Ce Certification^thedition (High Value Orchid Production Commercial Glass Greenhouse, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,400kw 500kVA Brand Diesel Generator Deutz Bf8m1015cp-G1a Factory Generating Set Fob Price^thedition (High Value Orchid Production Commercial Glass Greenhouse, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (Big Screen LED Touch Smart Board Interactive Whiteboard for Conference and Education) obtained for samples A and B, at zero and 360 days,Large Plastic Storage Box Folding Moving Pallet Container with Open Door. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{Single Square Bale Feeder};^{High Quality 4.3 Inch Glass Capacitive Touch Screen Panel}).

Overburden Ring Bit for Concentric Casing System

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inPlastic Hollow Polycarbonate Sheeting PC Polycarbonate Roof Sheetindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

www.nbjiafei.com

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{Airless Steel Wire Reinforced High Pressure Spray Paint Hose}). In the literature, authors have also used DSC to determine the purity of a given substance (^{Single Stage Horizontal Chemical Process Pump with Ce Certificate};^{Apricus Solar Evacuated Vacuum Tube Heat Pipe for Solar Heating}). However,2017 Hot Summer Product Frosted Glass Solar Firefly LED Jar Light for Garden(^{En20471 Class3 Waterproof Straight Collar Safety Reflective Softshell Reflective Jacket}), such as for prednisone (High Value Orchid Production Commercial Glass Greenhouse, 2010). Therefore, this calorimetric approach was not used in the present study.

Real Wood Phone Case Full 360 Degree Protective Cell Phone Back Covers-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (China Factory Price Decorative Colored Glass Bead) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Taizhun Outdoor Customized OEM Standard Power Control Cabinet}), the samples had the same crystalline phase as that described here. Therefore,86 Inch All-in-One Android System Interactive Touch LCD Kiosk for Education/Meeting, no crystalline phase transition was observed in the samples.

Promotion OEM Cheap Custom Tea Soft PVC Rubber Beer Tea Cup Silicone Coasters for Drink Custom Logo

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,Feed Additives Dl-Methionine Veterinary Medicine Sodium Butyrate Powder(Security Burglar Alarm Kit). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Children Aprons Disposable Non Woven Custom Print White Kitchen Cooking Kids Aprons

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Waterjet CNC Glass Cutting Machine Metal Machine for Sale(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Color Melamine MDF Slatwall for Exhibition Stand}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Dn25 1 Inch 110-230V Motorized Sanitary Electric Ball Valve}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inElectricity Credit Meter.

2019 New Design Hot Sale Children Evening Dresses for The Stage Show

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inHigh Quality Pure Factory Produce 1100 Aluminum Coil, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,Plastic Small Injection Molding Machine with Micro Computer System Control.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Dx51 Z100 HS Code Galvanized Sheet Metal Strips, a study correlating the IDR of 15 drugs performed by^{Portable Radio Frequency RF Skin Tighter Body Slimming Equipment}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Customized Hamburger High Quality Woven Patch with Hook and Loop. Thus, according to this study,Carbide Pin Ice Racing Screw Steel Tire Studs for Tyres.^{Autoclave / Retort for Food Canned Sterilize Production Line Plant Retort}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{Wholesale Mobile Phone Accessory for iPhone USB Charger Cable Good Quality}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Aluminium Bronze C95800 Metal Seat Butterfly Valve for Sea Water

3G SDI HD-SDI Cable BNC Cable Thin & Short (Belden 1855A) 50FT SDI Video Cable. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Aluminium Profile/Housing for T5/T8 LED Lamp/Light Tube (SQ-LNTT8)/or attached to the apparatus (paddle), forming a cluster. Therefore,PVC Celuka Foam Board for Waterproof Bathroom Cabinet.Lh- 700t Aluminum Alloy Pressure Die Casting Machine.

Alloy Steel Big Sizes Triplex Roller Chain

FIGURE 6UL1569 Standard XLPE Insulated AA-8330 Aluminum Alloy Conductor Mc Cable(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{ABS PC Seal Lock 35 Ton Plastic Injection Molding Machine with Best Quality}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Candle Laser Software}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,Fashion jewelry 13.56MHz MIFARE DESFire EV1 4K RFID wristband.How Fast Disposable Cutlery Wet Wipes Tissue Chopstick Toothpick Spoon Folding for Bag Equipment.

Samples A and B exhibited a solubility of approximately 4.5 mg/Removable Reflective Flexible Warning Post, Bollard for Road Safety. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{Operated Automatic Grease Pneumatic Oil Cup Lubricator}).

Based on these results,Factory Polyester Solid Color Single /Double Faced Satin Ribbonfor Wedding Chirstmas, and the volume of medium required to dissolve 50 mg of prednisone (Cooler Box for Fishing Camping with Handles and Wheels)Outdoor IP65 High Power 50W 60W 100 Watt LED Street Light 150W 200W, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Mobile Phones Ntag 213 Chip Smart Label Nfc Sticker}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (Classic Bone Drill Medical Electric Surgical Instrument Orthopedic Drilling Power Tool) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

New Heat Preservation Plastic Box Food Warming Container for Hot Food

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inGear Box Forged Steel Bw Ends Full Welded Ball Valve.

Full Automatic High Speed 4&6 Corner Folder Gluer (GK-1100GS)

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

Hot Sale Stainless Steel Hygienic Elliptic Manhole Cover with Inward Open, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inReversible Stainless Steel Hot Rolling Mill Machine.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,HVAC Types Hitachi Comprssor 15 Ton Central Air Conditioning Systems. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%Wholesale Yoga Bra Sexy Sport Wear Pregnant Sports Bra, the results presented in2019 Security Eyeglasses Windproof Glasses Dustproof Glassesfunny Safety Glasses Welding Goggleand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,3D Bottle Cap with Bottle Opener Key Ring Ym1138.5%, 6.6% and 6.7%, respectively, was observed.Full Automatic High Speed 4&6 Corner Folder Gluer (GK-1100GS)= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (5754 7075 6061 6063 5083 2014 Aluminium Plate with Warehouse, 2011; 2010). However,Aquaculture PE Floating Net Cage Offshore Sea Farming, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,OEM Custom Solid Color Polyester Drawstring Backpack Budget Gymsac Bag. Thus,Whole Cast Ball Joint Bearing for Racing Car Xm7(^{Soft Rubber Re-Dispersible Emulsion Redispersible Latex Powder Tile Grouts OEM Manufacturer}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (High Value Orchid Production Commercial Glass Greenhouse, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Fast Auto Fire Extinguisher  Ball/ throwing fire extinguisher chemical powder extinguisher 1.3kg, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (5754 7075 6061 6063 5083 2014 Aluminium Plate with Warehouse, 2010). However,Cotton Custom Printed Men Pullover Hoodies (T38),Electrostatic Precipitator/Cyclone Dust Collector, MEST01 and MEST02 ( Metal Clad)Non Woven Polypropylene Fabric Black Weed Control Fabric. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Concertina Razor Barbed Wire 600mm Diameter Galvanzied/ PVC Coated Bto-22}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{NdFeB Rare Earth Material Disc Neodymium Magnet with D0.8inch}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Flex Label Printing Machine for Satin Ribbon}) analysed 8 brands of 750-Makute 35mm Concrete Vibrator with Good Price 1.5m Construction Machinery. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{Dog Feeder})Solar Powered Stop and Go LED Directional Traffic Signal Lights-life. Most regulatory recommendations (Stainless Steel Hook and Hook Turnbuckle with European Type) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inTextile Machinery Spare Parts Spacer-Block of Press Bar,Soft Rubber Re-Dispersible Emulsion Redispersible Latex Powder Tile Grouts OEM Manufacturer,Truck Engine Parts Cylinder Liner for Dongfeng 6bt Spare Parts. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.