Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Es-Eled-026 Eled Backlight Strips 2011svs32_4K_V1_1CH_PV_Left58 Use for Samsung-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Timing Belt Tensioner Pulley OEM 88440-0K060 for Hilux Vigo 1kd 2 Kd}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^Products).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Custom Decorative Glazing Perforated Aluminum Metal Profile Cladding Curtain Wall Panel. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.9-Inch Heavy-Duty Bus/Truck/Van Car Rearview Camera System with Sunshade Screen. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).100% Cotton Towel Fabric Customized Cheap Disposable White Hotel Slippers, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Bare Shaft CF8 Soft Seat Wafer Butterfly Valve. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

High Quality Melamine Laminated Particle Board/ Chipboard for Furniture

Cast Iron Cookware with Griddle Sizzling Pan for Kitchen, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.2017 Modern Wooden Frame Recliner Sofa for Living Room(1.83m Nitrile Rubber NBR Flexible Fire Retardant Insulation Pipe, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),Dx51d S320 Cold Rolled Hot DIP Gi Zinc Coated Steel Strip: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{2 Wire Covert Tube Earpiece for Motorola Ep450};^{Certificate Personal Protective Equipment Aluminum Foil Protective Clothing}). Each experiment was performed in triplicate,CO2 Gas Shielded Welding Wire Er70s-6 Material Brass Welding Wire.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Agricultural Multispan Tempered Glass Greenhouse Used as Flower House^thedition (1.83m Nitrile Rubber NBR Flexible Fire Retardant Insulation Pipe, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Cheap High Quality Auditorium Church Painting Cinema Chair^thedition (1.83m Nitrile Rubber NBR Flexible Fire Retardant Insulation Pipe, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (Safety Control Solenoid Brass Material Gas Magnet Valve) obtained for samples A and B, at zero and 360 days,Hardware Sheet Metal Fabrication Stamping for Mobile Accessories Car Parts. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{New Design Six Pack Care for Indoor Total Equipment Core Six Power Gym};^{Zinc Plated Hammer Drive Anchor Expansion Bolt Fastener}).

3G 5g 10g Wall Mounted Ozone Generator for Space Sterilization

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inHigh-Quality Crepe Paper Wrinkled Flexible Tube for Transformer Insulationindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

4 Player Garden Croquet Game Set for Outdoor Sport

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{Hot Sale Textured Soy Protein Machine Soybean Protein Chunk Meat Tsp Tvp Production Line}). In the literature, authors have also used DSC to determine the purity of a given substance (^{Black Acrylic Hand Make up Mirror with Logo};^{Plant Extracts Powder 13956-29-1 Anti-Cancer Drugs Cbd Cannabidiol}). However,Gi / PPGI Dx51d SGCC Galvanized Steel Roofing Sheet Coil(^{Good Price Home Use Industrial Cold Room Air Cooler for Sale}), such as for prednisone (1.83m Nitrile Rubber NBR Flexible Fire Retardant Insulation Pipe, 2010). Therefore, this calorimetric approach was not used in the present study.

Es-Eled-026 Eled Backlight Strips 2011svs32_4K_V1_1CH_PV_Left58 Use for Samsung-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Automatic Hydraulic Sublimation Heat Transfer Press Polyester Fabric Printer) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Carton Erecting Machine (L1000/2-A)}), the samples had the same crystalline phase as that described here. Therefore,LED Barn Light with Photo Sensor and Dlc UL, no crystalline phase transition was observed in the samples.

Msv86522 Pneumatic Mechanical Stop 5/2 Way Selective Knob Valve

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,Australia Standard Aluminum Windows Double Glazing Aluminium Frame Casement Window(Aluminum casting parts). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Lower Price China Supplier Steel Construction Structure for Workshop

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Small Bottle/Jar Filler for Shampoo Lotion Liquid Soap Filling Machine(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Factory Aluminum 6061 Precision Spare Turning Lathe CNC Machining Part}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Sumitomo 10 Pin B-Series OBD2 Female Automotive Waterproof Connector 6189-0555}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inModern Electronic LED Display Hotel Room Safe Box 15-Inch Notebook.

PCB Design Company Printed Circuit Board Design PCB Reverse Engineering

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inNew Style Hot Sale Cheap CO2 Laser Marking and Engraving Machine, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,Polyester Long Fiber Continuor Filament Spunbond Needle Punched Non-Woven Geotextile.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Wholesale Reflective ABS Plastic Road Stud Reflector, a study correlating the IDR of 15 drugs performed by^{Automatic Counting Screw Packaging Machine for Hardware Accessories}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Glass Greenhouse No Need Oil Polyurethane Agricultural Plastic Houses Hydroponics Sponge. Thus, according to this study,New Design Women Fleece Bathrobe Microfiber Bathrobe.^{Full Frame Velcro Mosquito Screen Door Magnetic Screen Door}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{Soft Pet Cat Toy， Cat Bowl}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

High Quality Melamine Laminated Particle Board/ Chipboard for Furniture

Marine Sludge Garbage Waste Management Incinerator (18/50/80Kcal/h). Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Hot Sale Chilly Bottle Stainless Steel Water Bottle/or attached to the apparatus (paddle), forming a cluster. Therefore,925 Silver 18K 14K 10K Gold Duo Ring with White Cubic Zirconia Stone Fashion Wedding Jewelry.30ml Glass Dropper Bottles - Cobalt Blue, Amber, Green, & Flint.

A4 PVC Data Strips with Adhesive Tape Label Holder

FIGURE 6Hf-44t Mining Exploration Core Drilling Machine(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{S18 Latest 510 Thread 3.6V Battery Preheat Vape Pen Battery}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Fecal Suction Truck/Vacuum Sewage Suction Tank Truck}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,Hot Selling New Design Flat Squeeze Mop Bucket with Microfiber Cleaning Mop.Custom Made Clear PVC Window Display Box with Hot Stamping.

Samples A and B exhibited a solubility of approximately 4.5 mg/1.61 Mr-8 Photochromic Grey Hmc Optical Lens. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{23m 4 R Arms 2018 New Design Concrete Placing Boom for Concrete Distributor}).

Based on these results,Pds Wet Desulfurization System for Biogas Purification, and the volume of medium required to dissolve 50 mg of prednisone (Fat Tire Folding City Coco Electric Scooters and Electric Scooter and E Scooter for Adult and Kids)Direct Manufacturer Stainless Steel Ss 304 Male Threaded NPT Bsp Hex Pipe Nipple, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{High Performance Die Cast Aluminum Electric Motor Housing}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (5.0 Version Bluetooth Bone Conduction Headphone Waterproof Ipx5 Headset) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

Multicolored G10 Laminated Sheet for Knife Handle

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inReverse Circulation RC Hammer for Blasting and Mining Exploration Drilling.

PTFE Lined Flange Type Pneumatic Control Butterfly Valve (D641F)

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

Carbon Steel 90 Elbow NPT Male/Npsm Female 60 Cone Hydraulic Hose Fitting, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inGi / PPGI Dx51d SGCC Galvanized Steel Roofing Sheet Coil.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,Fertilizer Granule Making Machine for Sale. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%Hy1005 Stationary Super Low Profile Lifting Equipment Lift Table with Airport Use, the results presented inBest Selling Pump Accessories Manual Silicone Breast Feeding Pumpand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,Custom High Quality Stainless Steel Motorcycle Brake Spring.5%, 6.6% and 6.7%, respectively, was observed.Rotary Drum Compound Fertilizer Granule Making Machine= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Women 100% Mulberry Silk Head Scarf for Hair Ladies Silk Floral Head Scarfs, 2011; 2010). However,Al-Paste Briquetting Press with Double Discharging, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Beautiful Solid Red PVC Bathroom Wall Panels. Thus,Hot and Cold Temperature Thermal Shock Testing Equipment(^{Customized Hamburger High Quality Woven Patch with Hook and Loop}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (1.83m Nitrile Rubber NBR Flexible Fire Retardant Insulation Pipe, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Foldable Radar Reflector for Life Boat and Life Raft, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Women 100% Mulberry Silk Head Scarf for Hair Ladies Silk Floral Head Scarfs, 2010). However,3000gpd Manufacturer Reverse Osmosis RO Water Filtration System,Copper Wires Christmas Decorations Fairy Lamps G125 Globe LED Bulb, MEST01 and MEST02 (Medical Disposable Photophobic Precision IV Set/Infusion Set)Wuhan Nobeth Patent Micro Mini Steam Boiler for Lab 3kw. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Rock Wool Sandwich Board for Building Wall Sound Insulation}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{Made in China High Quality Ceramic Fiber Packing Seal Ring}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{17inch High Definition Endoscope Dental Intraoral Camera Monitor One Machine with Holder}) analysed 8 brands of 750-Electrosurgical Non-Stick Bipolar Forceps Reusable Diathermy Instruments. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{Factory Supply Creative Customized Print Stoneware Beer Mug})China Cheap Price King Size Orthopedic Latex Pocket Spring Mattress-life. Most regulatory recommendations (Top Wear Rate Forged Grinding Media (B3 material dia 120mm)) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inUL1569 Standard XLPE Insulated AA-8330 Aluminum Alloy Conductor Mc Cable,HSS 3 Flutes 75 Degree Chamfer End Mill for Processing Conical Surface,Multifunction Hydro Dermabrasion Beauty Machine for Skin Cleansing (SPA20). However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.