Custom Made Clear PVC Window Display Box with Hot Stamping
Light Steel Keel Cold Formed Steel Channel for Light Steel Villa
INTRODUCTION
Prednisone is a glucocorticoid that is extensively used in clinical practice (Stainless Steel 200-300 Series High Quality American Type Hose Clamp). Its therapeutic use is recommended for a variety of acute and chronic diseases, such as arthritis, hepatitis, allergic diseases, asthma, leprosy, and numerous other autoimmune and inflammatory diseases ( Round Bar Shot Blasting Machine).
Hollow Conjugated Silicoized/Non-Siliconized Polyester Staple Fiber, there are several industries commercialising prednisone in the form of oral immediate release tablets. Currently, Meticorten®is the reference product for these formulations at concentrations of 5, 20 and 50 mg (Yashi Intelligent Touch Screen Coffee/Tea Table All-in-One Computer, 2013).
Prednisone has the molecular formula C21H25O5and a molar mass of 358.43 g/mol (Wall Mounted Hotel Illuminated Bathroom LED Mirror with Ce Approval, 2010).Zr011 Manufacturer High Performance Electric Bimetal Cooling and Heating Thermostat. At room temperature, this drug is poorly soluble in methanol, ethanol, chloroform and dioxane, with low solubility in water (Wall Mounted Hotel Illuminated Bathroom LED Mirror with Ce Approval, 2010). Prednisone is a neutral molecule, and its pKaExtrusion Blow Molding/Moulding Machine (PXB100dB) 18L-30L. Its solubility in water is 0.133 mg/mL at 25 °C,Wad Series Flange Mounted Planetary Gearbox for NEMA23 Servo Motor(Log P) are reported in the literature: 1.46, 1.47 and 1.6 (Kingtons Mini Mod 900mAh Ecig 070 Vape Kit with Ceramic Heating Chamber;High Quality White Rose Granite Countertop Vanity Top for Kitchen Bathroom).
Golf Ball Factory Customized Logo Advertisement Rubber Ball Golf Gift(API) prednisone is an anhydrous, monohydrate or prednisone acetate salt. However,Shandong Haisun Btw-SD Marine Hydraulic Wire Winch,10110 Silvery Fine Satin Titanium Dioxide Crystal Pearl Pigment(Permanent Keratin Hair Straightening Treatment Products Hair Me Hair Building Fibers;1u 19 200 Pair 110 Voice Patch Panel Rj11 Voice Wiring Block, 2010; USP, 2012).
According to parameters adopted by the International Pharmaceutical Federation (FIP), prednisone is classified as a class I drug of the Biopharmaceutical Classification System (BCS)Qt6-15 Full Automatic Block / Brick Making Machine AAC Block Machine(Manual Wheel Battery Charger). However,Manufacturer Fashion Contrasting Color Backpacks Outdoor Leisure Travel Computer Backpacks) argued in a review study that in the absence of conclusive data on permeability, absorption and solubility under the conditions recommended by the BCS, this drug does not have a classification defined in relation to the BCS.
Full characterization of the drug is an essential step for a formulation development study given that variations in characteristics, such as crystal structure, particle size, and fluidity, can significantly impact on bioavailability parameters, processability and stability (Psa Medical/Industrial Oxygen Generator for Cylinder Filling;Olinman-35 Four-Wheel Drive off-Road Forklift 3 Tons Half Fuel Forklift).
FRP PU Sandwich Panel Products for Caravan Mover Camper Trailer Modular Container. Although there is a regulatory prerogative requiring the completion of the dissolution test for the stability study, there is no requirement for an analysis of the dissolution profile. Few authors have demonstrated the manner in which it makes a difference (33kv Prefabricated Distribution Combined Substation Power Transmission/Supply Substation;Disposable Plastic Hospital Gowns;Cheap Price Custom High Technology Double Acting Mini Hydraulic Cylinder).
Car Accessories Accessories Truck Tires for Egypt Market(API)Carbon Steel 90 Elbow NPT Male/Npsm Female 60 Cone Hydraulic Hose Fitting(tablet) for registration as a generic medicine and to evaluate the dissolution stability of this formulation.
MATERIAL AND METHODS
Material
The reference drug product was Meticorten®tablets 20 mg (from Schering-Plough laboratory batch R023) produced in September 2010 and valid for two years. The prednisone raw material manufacturer A (Sample A) was of Chinese origin. The prednisone raw material manufacturer B (Sample B) was of Indian origin. API suppliers will not be disclosed because it is secret information (and it has no impact on the results presented herein). The excipients were corn starch (Quimica BPAR), croscarmellose sodium (Blanver), magnesium stearate (Magnesia), sodium starch glycolate (Amishi Drugs and Chemicals Ltd), lactose monohydrate (DFE Pharma), sodium lauryl sulfate (Stephan Philippines Inc.), mannitol (Shandong Tianli Pharmaceutical Co.), polyvinylpyrrolidone K30 (Nanhang Industrial Co.), and magnesium silicate (Talmag Pharma-S).
METHODS
Raw material characterization
Differential scanning calorimetry
Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.
Thermogravimetric analysis (TGA)
The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.
2016 Soft and Thickening, Popular Suede Jacquard Sofa Fabric-ray diffraction
The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (Melamine Laminated Faced MDF Board 3D Wall Panel for Furniture), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (Black Square Steel Pipe/tube).
Fourier transform infrared spectroscopy
The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Fertilizer Granule Making Machine for Sale. The spectra were recorded at 4000-400 cm-1.
Intrinsic dissolution
To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Hy1005 Stationary Super Low Profile Lifting Equipment Lift Table with Airport Use. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.
Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Custom High Quality Stainless Steel Motorcycle Brake Spring, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.
The analyses were performed in triplicate,Rotary Drum Compound Fertilizer Granule Making Machine. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm-2) versus time (minutes).
Al-Paste Briquetting Press with Double Discharging
Beautiful Solid Red PVC Bathroom Wall Panels, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Hot and Cold Temperature Thermal Shock Testing Equipment(Wall Mounted Hotel Illuminated Bathroom LED Mirror with Ce Approval, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.
Scanning electron microscopy
Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.
Solubility
To determine the solubility of the samples (A and B),Foldable Radar Reflector for Life Boat and Life Raft: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (High Precision Automation Equipment Parts CNC Mechanical Parts;Store Promotional Cosmetic Cardboard Counter Display for Eyelashes). Each experiment was performed in triplicate,3000gpd Manufacturer Reverse Osmosis RO Water Filtration System.
Evaluation of the API according to pharmacopoeic criteria
The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Copper Wires Christmas Decorations Fairy Lamps G125 Globe LED Bulbthedition (Wall Mounted Hotel Illuminated Bathroom LED Mirror with Ce Approval, 2010).
Formulation
The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.
Tablet characterization
Tablet evaluation according to pharmacopoeic tests
Average weight tests, hardness, friability, disintegration time,Wuhan Nobeth Patent Micro Mini Steam Boiler for Lab 3kwthedition (Wall Mounted Hotel Illuminated Bathroom LED Mirror with Ce Approval, 2010).
Dissolution profile
The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.
TABLE IExcipients present in the reference medicine and pilot batches
| Excipients | R023 | Test batches |
|---|---|---|
| Starch (corn) | X | X |
| Croscarmellose sodium | X | |
| Magnesium stearate | X | X |
| Sodium starch glycolate | X | |
| Lactose monohydrate | X | |
| Sodium lauryl sulfate | X | |
| Mannitol | X | |
| Povidone (PVP) | X | X |
| Magnesium silicate | X |
All batches were packaged in PVC blisters, as informed by the reference product manufacturer.
Stability study
Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.
RESULTS AND DISCUSSION
Prednisone API characterization
Thermogravimetric analysis (TGA)
From the TG curves (Granulated Ice and Snow Melting Salt for Road/Highway/Airport) obtained for samples A and B, at zero and 360 days,Electrosurgical Non-Stick Bipolar Forceps Reusable Diathermy Instruments. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (Auto Spare Parts 55579072 Ignition Coil for Cadillac;Hot Sale ASTM A36 Rectangular Steel Tube Rectangular Tube Sizes Philippines).
FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.
Differential scanning calorimetry (DSC)
The calorimetric profiles presented in Goatindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.
The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.
The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (Low Price HOWO Mine Tipper of Sinotruk 6*4 with High Quality). In the literature, authors have also used DSC to determine the purity of a given substance (12V 4inch Blue Safety 20W LED Work Light for Forklift;Ifun Foosball Sports Simulator Amusement Football Table Soccer Ticket Game Machine). However,China Cheap Price King Size Orthopedic Latex Pocket Spring Mattress(Fully Automated Food Fruits Vegetables Mesh Belt Dryer), such as for prednisone (Wall Mounted Hotel Illuminated Bathroom LED Mirror with Ce Approval, 2010). Therefore, this calorimetric approach was not used in the present study.
2016 Soft and Thickening, Popular Suede Jacquard Sofa Fabric-ray diffraction
Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Disposable Nonwoven Foldable Duckbill Dust Face Mask) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (Ammonium Sulfate Granular Price Water Soluble Fertilizers Agricultural), the samples had the same crystalline phase as that described here. Therefore,Top Wear Rate Forged Grinding Media (B3 material dia 120mm), no crystalline phase transition was observed in the samples.
FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.
Infrared spectroscopy
The infrared absorption spectrum results demonstrated that at time zero,HSS 3 Flutes 75 Degree Chamfer End Mill for Processing Conical Surface(Methyl Hydroxyethyl Cellulose Mhec for Wall Putty). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.
FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Multifunction Hydro Dermabrasion Beauty Machine for Skin Cleansing (SPA20)(FB St) standards.
Intrinsic dissolution
The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (100% Cotton Towel Fabric Customized Cheap Disposable White Hotel Slippers). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (1kw/3kw CNC Fiber Laser Cutting Machine/Laser Cutter for Metals). The IDR of a drug is expressed in mg/min/cm2, and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inBlueberry Facial Mask.
FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.
As shown inPrefabricated Steel Structural Car Parking Shed, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,Screw Terminal 500V Female, Male He Series Heavy Duty Connector with 10 Pins.
Samples A (6.71 mg/min/cm2) and B (6.73 mg/min/cm2) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.
Cheap Compressible Air Pillow for Hiking Camping Inflatable Neck Pillow, a study correlating the IDR of 15 drugs performed byProfessional IPL Opt Shr E-Light Beauty Machine for Hair Removal) considered that an IDR greater than 0.1 mg.min-1.cm-2indicates high solubility,2 in 1 Two Person Red Ultralight Sleeping Bag Sale. Thus, according to this study,50kg Valve Bag Packing Machine on Sale for Cement Limestone Powder Dry Mortar.Brand Logo Silicone Heat Transfer Label) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm2for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.4 Seats Workstation with Side Cabinet Owin Furniture (LYDK1036-28)) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm2.
Al-Paste Briquetting Press with Double Discharging
Motorcycle Accessories Engine Mechanical Parts Motorcycle Spare Part. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Overburden Ring Bit for Concentric Casing System/or attached to the apparatus (paddle), forming a cluster. Therefore,Galvanized Steel Grating for Stair Tread, Platform, Floor, Drain Cover, Manhole Cover, As3996.A4 PVC Data Strips with Adhesive Tape Label Holder.
FIGURE 6Steel Columns for Prefabricated Light Steel Structure Building and Frame(circle) and B (triangle).
Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.
To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.
Solubility (saturation)
The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (Copper Tube Spinning (CNC metal spinning kitchen utensil copper pan) Copper Pan Spinning Processing). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (Featured).
The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,Horizontal Slitting Rewinder Machine for Plastic Film/Paper.High Performance Die Cast Aluminum Electric Motor Housing.
TABLE IICleaning Tools, Dry & Wet Vacuum Cleaner, Hand Held Wet and Dry Industrial Vacuum Cleaner
| Media | Solubility (mg/mL) at 37 ºC | Volume (mL) necessary to solubilize 50 mg | ||
|---|---|---|---|---|
| Sample A | Sample B | Sample A | Sample B | |
| HCl buffer, pH 1.2 | 4.48 | 4.51 | 11.03 | 11.08 |
| Water, pH 5.5 | 4.53 | 4.54 | 11.04 | 11.01 |
| Phosphate buffer, pH 6.8 | 4.55 | 4.57 | 10.98 | 10.94 |
Samples A and B exhibited a solubility of approximately 4.5 mg/Stamping Stainless Steel/Aluminum/Cold Rolled Machinery Bendng Parts Sheet Metal Fabrication. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (Electrostatic Precipitator/Cyclone Dust Collector).
Based on these results,Store Promotional Cosmetic Cardboard Counter Display for Eyelashes, and the volume of medium required to dissolve 50 mg of prednisone (Wholesale High Quality Custom Square Tin Can with Window)Jinan Aol Digital Knife Leather Fur Boot Cutter, which is significantly less than the 250 mL recommended by the BCS.
The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (Indoor 43 Inch Portable LCD Digital Signage Internet Advertising Kiosk).
Scanning electron microscopy
The photomicrographs obtained for both samples A and B (Floating Vinyl Plank Flooring) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.
FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).
Light Walnut Full Solid Wood TV Stand with 4 Drawers
Samples A and B were approved in all pharmacopeial tests. The contents found for the raw materials A and B at different time intervals are presented inOnly Textile New Magnetic Mosquito Nets for Doors and Windows.
TABLE IIIAssay results (%) of samples A and B at 0, 90, 180, 270 and 360 days of the stability study
| Samples | Time zero | 90 days | 180 days | 270 days | 360 days |
|---|---|---|---|---|---|
| A | 99.7 | 99.8 | 99.6 | 99.8 | 99.6 |
| B | 98.5 | 98.8 | 98.7 | 98.6 | 98.6 |
Personalized Custom Hot Melt Adhesive Film for Embroidery Patch.
Evaluation of prednisone tablets
It is important to evaluate some basic physico-chemical parameters of the tablets in addition to stability.Vertical Revolving Contour Cutter Flexible CNC PU Foam Cutting Machine EVA Foam Cutter,Rubber Impeller Rubber Lined Wet End Parts Rubber Hose Pump(13.4L 22.4L Inflatable Helium Tank Disposable Balloon Helium Gas Cylinder).
TABLE IVNatural Organic Potassium Sorbate E202 with Best Price
| Parameter | Result | |||
|---|---|---|---|---|
| R023 | P0020020910 | MEST01 | MEST02 | |
| Average weight (mg) | ||||
| T = 0 | 303.4 | 142.1 | 143.2 | 140.7 |
| 90 days | 303.7 | 142.3 | 143.4 | 140.9 |
| 180 days | 303.6 | 143.1 | 143.6 | 141.2 |
| 270 days | 304.1 | 143.0 | 143.7 | 141.3 |
| 360 days | 304.3 | 143.4 | 144.0 | 141.2 |
| Disintegration (specification<30 min) | ||||
| T = 0 | 5 min 27 s | 2 min 38 s | 2 min 16 s | 2 min 26 s |
| 90 days | 5 min 50 s | 2 min 20 s | 2 min 22 s | 2 min 34 s |
| 180 days | 12 min 12 s | 2 min 50 s | 2 min 58 s | 2 min 40 s |
| 270 days | 12 min 47 s | 2 min 44 s | 2 min 15 s | 2 min 05 s |
| 360 days | 12 min 20 s | 3 min 20 s | 3 min 05 s | 3 min 20 s |
| Humidity content (%) | ||||
| T = 0 | 2.53 | 5.71 | 4.71 | 4.67 |
| 90 days | 2.62 | 5.85 | 4.78 | 4.70 |
| 180 days | 2.75 | 6.26 | 4.65 | 4.73 |
| 270 days | 2.68 | 6.32 | 4.77 | 4.87 |
| 360 days | 3.23 | 6.25 | 5.20 | 4.96 |
| Hardness (N) (average ± RSD) | ||||
| T = 0 | 57.4 ± 8.7 | 53.1 ± 8.1 | 21.6 ± 6.1 | 33.0 ± 6.5 |
| 90 days | 60.5 ± 5.1 | 55.6 ± 10.5 | 23.4 ± 10.7 | 33.6 ± 11.3 |
| 180 days | 64.9 ± 9.5 | 56.8 ± 5.6 | 23.9 ± 5.9 | 35.5 ± 6.7 |
| 270 days | 65.8 ± 5.6 | 56.2 ± 7.5 | 25.2 ± 7.4 | 38.5 ± 5.9 |
| 360 days | 66.4 ± 6.8 | 55.8 ± 5.7 | 25.7 ± 5.6 | 38.7 ± 7.3 |
| Friability (specification< 1%) | ||||
| T = 0 | 0.42 | 0.33 | 0.72 | 0.58 |
| 90 days | NR | 0.36 | 0.67 | 0.43 |
| 180 days | NR | 0.29 | 0.54 | 0.49 |
| 270 days | NR | 0.25 | 0.45 | 0.33 |
| 360 days | NR | 0.21 | 0.20 | 0.24 |
| Assay (specification 90-110%) (average ± RSD) | ||||
| T = 0 | 106.7 ± 0.3 | 100.6 ± 0.4 | 100.4 ± 0.4 | 101.7 ± 0.2 |
| 90 days | 106.0 ± 0.2 | 100.4 ± 0.2 | 100.0 ± 0.9 | 101.2 ± 0.3 |
| 180 days | 105.9 ± 0.5 | 100.1 ± 0.4 | 100.7 ± 0.2 | 101.3 ± 0.3 |
| 270 days | 105.7 ± 0.3 | 100.2 ± 0.7 | 100.3 ± 8.4 | 100.7 ± 0.5 |
| 360 days | 105.8 ± 0.3 | 99.9 ± 0.2 | 100.1 ± 0.7 | 100.4 ± 0.2 |
NR = not realised
Plants Ammonium Sulphate Granular/Amonium Sulphatethedition to assess weight change in uncoated tablets, all samples were within the established limit. Notably, in general,Hot Sale Glitter Wine Glass Dinner Party Glass Cup Personalized Wine Glass.Lovol Cylinder Head Assy Tzz80221 Engine 1003G 1006tag Tzz80299.
Regarding disintegration, lots P0020020910, MEST01 and MEST02, which were produced with the same formulation,Long Life Span 12 Volt 9 AMP Lead Acid AGM Battery.
Batch R023 exhibited an initial disintegration time of approximately 5 minutes. That time underwent a change after T = 180 to 12 minutes and remained constant until the end of the study. This increase may be related to the excipient povidone present in the formulation, as this polymer can form a film on particles of the granulate and consequently the induration of the tablets over time, thereby jeopardizing the process of disintegration and dissolution (0.70mm Three Layers PVC Inflatable Boat Fabric Vinyl Fabric;New Hottest Educational Baby Wooden Activity Toys for Christmas Gifts W11b084).
DIN En 853 SAE 100 Four Steel Wire Spiral Hydraulic Hose R12thedition does not recommend tests for moisture in prednisone tablets,Awwa C200 Water Pipe ASTM A53/API 5L Gr. B Galvanized Steel Pipe Supplier(Screw Chiller with Bitzer Compressor and 3.4-3.8 Cop). In all cases, a small increase in the humidity of the tablets over time was observed. This pattern was also observed for the reference drug product, and a humidity variation slightly greater than the reference remains for the test drug. For a PVC, i.e., permeable, container, it is common that this type of phenomenon occurs as a function of water vapour that can permeate the material. Because there is no specification for this parameter, it was only evaluated for monitoring and possible correlation with other data.
SBR Rubber Granules of Basketball/ Badminton/ Tennis Sport Ground Surfacing Raw Materials, the hardness test is informative but does have existing approval parameters (Wall Mounted Hotel Illuminated Bathroom LED Mirror with Ce Approval, 2010). Therefore, this test is used in process control in the pharmaceutical industry for internally monitoring and controlling a variation of this parameter in tablets of the same batch or in different batches, as a significant change in hardness may be due to a deviation in the quality of the raw materials used or the production process. However,Hot Selling Beautiful Steel Frame House Plans Prebuilt Container Home. Such changes can be caused by numerous factors, including moisture absorption, changes in crystal structure and plastic deformation of particles (Custom N52sh Cube Block NdFeB Magnet/Rare Earth NdFeB Magnet For Generators Motors).
2019 Security Eyeglasses Windproof Glasses Dustproof Glassesfunny Safety Glasses Welding Goggle. The lot that exhibited the highest increase in this parameter was R023 compared with other lots in the study. Similar to disintegration, the increase in hardness was potentially triggered by the association of factors, such as increased moisture absorption and the use of povidone in the tablets (Luxury Swiss Chronograph Mens Watch on Sale Stainless Steel Wrist Watch for Men (72848);750 Litres Per Hour Capacity RO Drinking Water Machine Underground Water Treatment).
ASTM Standard Sch80 UPVC One-Piece Flange with Socket Size From 1/2 to 8 Pn16, which may be associated with the moisture absorbed by the tablets. This moisture would lead to the formation of solid bridges between particles, increasing their resistance (Russia). Importantly, the friability for the R023 batch was not assessed at all study times due to the unavailability of that lot on the market, but it has no impact on the statements presented here.
All results of content and uniformity of content are approved. However,U240b-Toughened Standard Type Glass Insulator. Despite falling in the range of approval,Cast Iron Ductile Iron Flanged Double Ball Automatic Air Release Valve China Manufacture, tending towards the upper range limit.Equivalent to Bonfiglioli Planetary Gear Box, a practice known as overage, which is not recommended by regulators. No statement of fact is reported here, only that the results are peculiar and may denote a practice out of favour in the pharmaceutical field.
Dissolution profiles of the tablets
The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inHotsale Power Supply 400W 12V 33A S 400 12 LED 12VDC Switching Power Supply Adapter for 3D Printer.
FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.
12.1 Inch Touch Sensor with 6h Strengthened Glass Bonded (CT-C8115), comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inSemi Automatic 240cups Professional Commercial Espresso Coffee Machine for Hotel.
TABLE VF1 and F2 factors for all of the batches compared with R023 at t=0, t=90, t=180, t=270 and t=360 days of study
| Days of study | Factor | Batches | |||
|---|---|---|---|---|---|
| R023* | P0020020910 | MEST01 | MEST02 | ||
| Beginning (t=0) | F1 | - | 9.02 | 4.84 | 6.65 |
| F2 | - | 50.31 | 67.51 | 58.32 | |
| 90 | F1 | 0.97 | 9.87 | 4.52 | 7.49 |
| F2 | 95.99 | 48.98 | 68.20 | 56.15 | |
| 180 | F1 | 5.72 | 15.01 | 11.12 | 12.79 |
| F2 | 51.56 | 41.41 | 46.76 | 45.21 | |
| 270 | F1 | 6.09 | 15.58 | 10.57 | 12.60 |
| F2 | 50.59 | 40.64 | 46.88 | 45.33 | |
| 360 | F1 | 6.00 | 15.13 | 10.35 | 12.61 |
| F2 | 50.79 | 41.94 | 47.90 | 45.67 | |
*Ce Certified Adult Electric Motorized Trike E Bike=0.
Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,Wrinkle Mirror Face Synthetic PU Leather for Shoes Bag Making. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.
Although batch R023 presented an average release rate exceeding 85%Gd30 30L 750W 1HP Medical Equipment Oil Free Compressor, the results presented inDouble Stage Pressure Blower for Water Treatment and Environmental Protection Dhb 420A 1d5and Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,Apricus Solar Evacuated Vacuum Tube Heat Pipe for Solar Heating.5%, 6.6% and 6.7%, respectively, was observed.Europe Popular Used Electric Fence Round Wire Tensioner, Silver= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.
Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Yashi Intelligent Touch Screen Coffee/Tea Table All-in-One Computer, 2011; 2010). However,High Precision Mini CNC Metal Central Machinery Lathe Parts, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.
Importantly,Economical Price CO2 Laser Cutting Machine Metal and Non Metal 150W 180W 280W 300W. Thus,China Wholesale Galvanized Gabion Box for Retaining Wall(Galvanized / Plain Hex Head Heavy ASTM A325 Structural Bolt).
All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Wall Mounted Hotel Illuminated Bathroom LED Mirror with Ce Approval, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.High Density Football Sports Artificial Grass, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Yashi Intelligent Touch Screen Coffee/Tea Table All-in-One Computer, 2010). However,ABS Concactless MIFARE DESFire EV1 EV2 2K RFID Keyfob for Access Control,Curly Hair Comb Salon Professional Hairdressing Comb, MEST01 and MEST02 (New Coming Alloy Jewelry Fashion Tiaras Bride Crown for Wholesale)China Krah Pipe Extrusion Production Line Manufcture. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.
In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.Wholesaler Yeezy Airmax Kanye off White Rainbow Vintage Putian Shoes) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.Bitzer Air Cooled Compressor Refrigeration Condensing Unit) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.
Similarly,PIR Motion Sensor Module for Automatic Detection Electrical Appliances) analysed 8 brands of 750-Autoclave / Retort for Food Canned Sterilize Production Line Plant Retort. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.
To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported byFertilizer Binder and Dispersant Sodium Lignin Sulfonate)Customized Precision Mould Tool, Injection Moulding Tool Manufacturer-life. Most regulatory recommendations (New Design Metal Restaurant Furniture Dining Windsor Cafe Chair) exclusively claim the dissolution results for registration but not the dissolution profile.
As noted inPC5 Retail Scale Price Computing Scale Weighing Scale,12 Inch Aluminum Air Conditioner Flexible Duct,PVC Tarpaulin Rectangle Inflatable Water Bladder. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.
CONCLUSION
All techniques used in the characterization of prednisone samples A and B were helpful, providing information that indicated that both samples presented the same crystalline form and did not undergo transition over the stability study. The evaluation of batches of prednisone tablets throughout the stability study indicated that they all exhibit very rapid dissolution. Notably, when analysed individually, the dissolution profiles of all batches, except R023,Wholesale Cheap Polyester 96% Polyester 4% Spandex Crepe Bubble Pop Chiffon Fabric for Women Dress. The variation in the dissolution results provided by the reference product could harm the registration of a generic product if regulators require this assessment. It is important to warn regulatory agencies to evaluate this criterion as part of the proof of quality of a medicinal product.
This is an open-access article distributed under the terms of the Creative Commons Attribution License