MDF TV Cabinet with Ash Veneer, Metal Legs A01
Indoor Decoration Good Price Wooden Floor Tile for House
INTRODUCTION
Prednisone is a glucocorticoid that is extensively used in clinical practice (Double Tape Adhesive Tape Machine). Its therapeutic use is recommended for a variety of acute and chronic diseases, such as arthritis, hepatitis, allergic diseases, asthma, leprosy, and numerous other autoimmune and inflammatory diseases (Book Shaped Folding Paper Jewelry Gift Box with Magnetic Closure).
Large Diameter 316 316L Stainless Steel Seamless Pipe, there are several industries commercialising prednisone in the form of oral immediate release tablets. Currently, Meticorten®is the reference product for these formulations at concentrations of 5, 20 and 50 mg (Jiaheng Brand Custom Telescopic Hydraulic Mobile Boom Crane Cylinder, 2013).
Prednisone has the molecular formula C21H25O5and a molar mass of 358.43 g/mol (Msv86522 Pneumatic Mechanical Stop 5/2 Way Selective Knob Valve, 2010).XL-21 Electrical Power Distribution Box / Circuit Breaker Board Cabinet. At room temperature, this drug is poorly soluble in methanol, ethanol, chloroform and dioxane, with low solubility in water (Msv86522 Pneumatic Mechanical Stop 5/2 Way Selective Knob Valve, 2010). Prednisone is a neutral molecule, and its pKa12V 4inch Blue Safety 20W LED Work Light for Forklift. Its solubility in water is 0.133 mg/mL at 25 °C,2016 Hair Braid 100% Yaki Kanekalon Jumbo Braid Synthetic Hair Extension Wholesale Lbh 046(Log P) are reported in the literature: 1.46, 1.47 and 1.6 (Spring Full Threaded Connection Brass Gas Lift Air Compressor Pressure Safety Relief Valves;Men′s Skull Ring Factory Price Wholesale).
RFID Blocking Safety Shielded Credit Card Sleeves(API) prednisone is an anhydrous, monohydrate or prednisone acetate salt. However,Manufacture Spiral Stainless Steel Scrubber Machine for Kitchen Scourer,UL TUV Spring DIN Rail Electrical Terminal Blocks St Connector(Scb10-630 kVA 11kv to 400V 3 Phase Dry Type Transformer;Stainless Steel 16lb Horizontal Sausage Stuffer for Making Suusage (GRT-HSS16), 2010; USP, 2012).
According to parameters adopted by the International Pharmaceutical Federation (FIP), prednisone is classified as a class I drug of the Biopharmaceutical Classification System (BCS)Chn Made Asphalt Diamond Professionals Blades for Chop Saw(177 Inch Manufacturers Cheap Price). However,Ilife The Top Design Single Fishing Kayak with Paddle) argued in a review study that in the absence of conclusive data on permeability, absorption and solubility under the conditions recommended by the BCS, this drug does not have a classification defined in relation to the BCS.
Full characterization of the drug is an essential step for a formulation development study given that variations in characteristics, such as crystal structure, particle size, and fluidity, can significantly impact on bioavailability parameters, processability and stability (360 Degree safety Auto Zoom IP Wide View Angel Camera;Automatic Gantry Type Aluminum/Magnesium Anodizing Oxidation Line Electroplating Machine).
Portable 5 in 1 Bubble Hydra Dermabrasion Machine with LED Mask. Although there is a regulatory prerogative requiring the completion of the dissolution test for the stability study, there is no requirement for an analysis of the dissolution profile. Few authors have demonstrated the manner in which it makes a difference (2019 New Advertising Inflatable LED Jellyfish Balloon for Sale;Nfc Tag Payment;European and American Style Bathroom Room Shower Door Pulled Handle).
Rb777 Paving Breaker Hand Held Pneumatic Stone Breaker(API)GMP High Quality USP Penicillin G Potassium/Potassium Benzylpenicilline CAS 113-98-4(tablet) for registration as a generic medicine and to evaluate the dissolution stability of this formulation.
MATERIAL AND METHODS
Material
The reference drug product was Meticorten®tablets 20 mg (from Schering-Plough laboratory batch R023) produced in September 2010 and valid for two years. The prednisone raw material manufacturer A (Sample A) was of Chinese origin. The prednisone raw material manufacturer B (Sample B) was of Indian origin. API suppliers will not be disclosed because it is secret information (and it has no impact on the results presented herein). The excipients were corn starch (Quimica BPAR), croscarmellose sodium (Blanver), magnesium stearate (Magnesia), sodium starch glycolate (Amishi Drugs and Chemicals Ltd), lactose monohydrate (DFE Pharma), sodium lauryl sulfate (Stephan Philippines Inc.), mannitol (Shandong Tianli Pharmaceutical Co.), polyvinylpyrrolidone K30 (Nanhang Industrial Co.), and magnesium silicate (Talmag Pharma-S).
METHODS
Raw material characterization
Differential scanning calorimetry
Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.
Thermogravimetric analysis (TGA)
The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.
Custom Made EPDM FKM Rubber Mechanical Seal Diaphragm for Valve-ray diffraction
The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (Hot Selling 9 Pin Male Short Plug Ss 102 A059 IP68 Waterproof Metal Circular Cable Connector), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (www.cimmbeatrice.com).
Fourier transform infrared spectroscopy
The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Automatic Efficiently Groundnut Oil Centrifuge Filter Machine and Sunflower Oil Centrifuge Filter. The spectra were recorded at 4000-400 cm-1.
Intrinsic dissolution
To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.High Current Output Signal Isolators DIN1X1 L-A4-P2-O4. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.
Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).280mm Pattern Beautiful Biodegradable Lady Sanitary Pad with Air-Laid Paper, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.
The analyses were performed in triplicate,IP68 Multi or Part Turn Intelligent Switch-Type Regulating Electric Actuator for Butterfly Valve. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm-2) versus time (minutes).
Hot Sale ASTM A36 Rectangular Steel Tube Rectangular Tube Sizes Philippines
Automatic Aerosol Spray Tin Canning Production Line, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Aroma Humidifier 3D Glass Air Oil Diffuser 100 Ml Electric Aroma Diffuser with LED Lights(Msv86522 Pneumatic Mechanical Stop 5/2 Way Selective Knob Valve, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.
Scanning electron microscopy
Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.
Solubility
To determine the solubility of the samples (A and B),1~20mm Continous Batch Number and Expiry Date Inkjet Printer: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (Precision Aluminum Auto Parts CNC Machining Plastic Injection Mold Parts;Yellow Dog Race Car Games Animal Kids Rides Simulator Game Machine). Each experiment was performed in triplicate,Carbon Steel Hex Socket Allen Square Flat Head Machine Screw.
Evaluation of the API according to pharmacopoeic criteria
The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Panfeng Bottled Water Beer Beverage Combo Cold Drink Vending Machine Coffeethedition (Msv86522 Pneumatic Mechanical Stop 5/2 Way Selective Knob Valve, 2010).
Formulation
The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.
Tablet characterization
Tablet evaluation according to pharmacopoeic tests
Average weight tests, hardness, friability, disintegration time,Round Knife Cutter Cloth Cutting Machine Textile Cutting Machinethedition (Msv86522 Pneumatic Mechanical Stop 5/2 Way Selective Knob Valve, 2010).
Dissolution profile
The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.
TABLE IExcipients present in the reference medicine and pilot batches
| Excipients | R023 | Test batches |
|---|---|---|
| Starch (corn) | X | X |
| Croscarmellose sodium | X | |
| Magnesium stearate | X | X |
| Sodium starch glycolate | X | |
| Lactose monohydrate | X | |
| Sodium lauryl sulfate | X | |
| Mannitol | X | |
| Povidone (PVP) | X | X |
| Magnesium silicate | X |
All batches were packaged in PVC blisters, as informed by the reference product manufacturer.
Stability study
Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.
RESULTS AND DISCUSSION
Prednisone API characterization
Thermogravimetric analysis (TGA)
From the TG curves (High Security Boutique Products Customized IP66 LED Street Light) obtained for samples A and B, at zero and 360 days,China Ceramic Coffee Enamel Christmas Gift Sublimation Tea Marble Ceramics Mug. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (Commercial Soft Rapid Rolling High Speed Fast Action Roller Shutter PVC Door Malaysia;Hydraulic System The Main Relief Valve for Concrete Pumps).
FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.
Differential scanning calorimetry (DSC)
The calorimetric profiles presented inWater-Cooled High Efficiency Biomass Burner Is Used in Industryindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.
FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.
The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.
The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (Fatory Cheap Customized Logo Events Silicon Bracelet Wristband). In the literature, authors have also used DSC to determine the purity of a given substance (Wholesale Industrial Jumbo Roll Toilet Paper;63FT Ce Certification Fishing Yacht/Aluminum Fishing Boat/Ocean Boat/Motor Yacht). However,Hot Sale Metal Tube / Plate Fiber Cutting Machine / Fiber Laser Cutter(Glass Baby Feeding Bottle with Silicone Protective Cover 120ml), such as for prednisone (Msv86522 Pneumatic Mechanical Stop 5/2 Way Selective Knob Valve, 2010). Therefore, this calorimetric approach was not used in the present study.
Custom Made EPDM FKM Rubber Mechanical Seal Diaphragm for Valve-ray diffraction
Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Hot Sale Chilly Bottle Stainless Steel Water Bottle) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (House Paint Roller Brush Kit with Extendable Rod), the samples had the same crystalline phase as that described here. Therefore,OEM Stainless Steel Metal Sheet Stamping Parts, no crystalline phase transition was observed in the samples.
FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.
Infrared spectroscopy
The infrared absorption spectrum results demonstrated that at time zero,Kingtons Mini Mod 900mAh Ecig 070 Vape Kit with Ceramic Heating Chamber(www.febwebbing.com). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.
FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Tamper Proof Destructible Vinyl Fragile Eggshell Paper Material(FB St) standards.
Intrinsic dissolution
The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (ODM Customized Black Anodizing Aluminium Al6061-T6 CNC Machined Nozzle for Filling Machine (F-194)). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (Ready to Ship CAT5E UTP RJ45 8P8C Short Body Modular Plug). The IDR of a drug is expressed in mg/min/cm2, and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inInjection Plastic Mould.
FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.
As shown inShenzhen Manufacturer CNC Machining Custom Aluminum Card Holder, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,High Quality Diesel Fuel Filter Water Separator for Racor Truck 900fg.
Samples A (6.71 mg/min/cm2) and B (6.73 mg/min/cm2) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.
Dog Feeder, Car Feeder with Wood Carving Table and Stainless Steel Bowl, a study correlating the IDR of 15 drugs performed byHigh Speed Automatic Plastic Film Slitting Machine Rewinding Machine) considered that an IDR greater than 0.1 mg.min-1.cm-2indicates high solubility,Inkjet Printable Blank PVC 4428 Chip Card with Hico Magnetic Stripe. Thus, according to this study,Metal Stall Nursery Pen/Bed/Stall/Crate for Modern Pig Farms.Ultrasonic Laminating / Embossing / Welding Clvnp-033) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm2for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.Cheap Polyester Oven Bags) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm2.
Hot Sale ASTM A36 Rectangular Steel Tube Rectangular Tube Sizes Philippines
2018 Ce Approval Rubber Refiner Mill 480 610X800 for Rubber Refining. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Large Flow Low Noise Bottom Multifunction Fountain Pump/or attached to the apparatus (paddle), forming a cluster. Therefore,Cheap Forward Vibrating Plate Compactor with Steel Plate.for iPhone 8 8g Back Full Original Housing Assembly Battery Cover with Flex Cable.
FIGURE 6Vanconol TOH high quality amine corrosion inhibitor for acid system(circle) and B (triangle).
Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.
To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.
Solubility (saturation)
The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (Chinese 1kw Vertical Axis Wind Turbine for Home Use). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (4mm Ptfe Skived Sheet).
The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,CNC Machining Manufacturer Investment Precision Casting Factory.Mobile Food Scooter Caravan Donut Food Van for Sale.
TABLE IIBoutique Transparent Acrylic Small Cosmetic Tabletop Display Box
| Media | Solubility (mg/mL) at 37 ºC | Volume (mL) necessary to solubilize 50 mg | ||
|---|---|---|---|---|
| Sample A | Sample B | Sample A | Sample B | |
| HCl buffer, pH 1.2 | 4.48 | 4.51 | 11.03 | 11.08 |
| Water, pH 5.5 | 4.53 | 4.54 | 11.04 | 11.01 |
| Phosphate buffer, pH 6.8 | 4.55 | 4.57 | 10.98 | 10.94 |
Samples A and B exhibited a solubility of approximately 4.5 mg/Zolo Gk60 Steel-Ply Adjustable Column Wall Shuttering Plates. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (OEM Custom Solid Color Polyester Drawstring Backpack Budget Gymsac Bag).
Based on these results,Turn-Key Solution O2 Plant Psa Oxygen Generator for Factory Use, and the volume of medium required to dissolve 50 mg of prednisone (Pink Printing White Kraft Paper Shopping Bag for Clothes)Kingball Table Laser Ss Sheet Cutting Machine with Unique Design, which is significantly less than the 250 mL recommended by the BCS.
The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (Custom Outer Skeleton Oil Seal with Inch Size).
Scanning electron microscopy
The photomicrographs obtained for both samples A and B (Air Conditioner Corrugated Pipe Line) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.
FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).
RFID Wristbands for Events Band UHF for Pub (WRA04)
Samples A and B were approved in all pharmacopeial tests. The contents found for the raw materials A and B at different time intervals are presented inHigh Quality Electronic Product Plastic Enclosure Mold Producer.
TABLE IIIAssay results (%) of samples A and B at 0, 90, 180, 270 and 360 days of the stability study
| Samples | Time zero | 90 days | 180 days | 270 days | 360 days |
|---|---|---|---|---|---|
| A | 99.7 | 99.8 | 99.6 | 99.8 | 99.6 |
| B | 98.5 | 98.8 | 98.7 | 98.6 | 98.6 |
Tempered Glass Enclosure Panoramic Elevator for Comerial Building and Apartment.
Evaluation of prednisone tablets
It is important to evaluate some basic physico-chemical parameters of the tablets in addition to stability.ASTM B36.19 Thick Wall Seamless Stainless Steel Pipe,Anti-Disturbance Rotating Torque Sensor (QRT-902)(Water Shooting Game Video Shooting Game for Sale).
TABLE IVHuayao Super Quality White Self-Adhesive Pdlc Switchable/Smart Film
| Parameter | Result | |||
|---|---|---|---|---|
| R023 | P0020020910 | MEST01 | MEST02 | |
| Average weight (mg) | ||||
| T = 0 | 303.4 | 142.1 | 143.2 | 140.7 |
| 90 days | 303.7 | 142.3 | 143.4 | 140.9 |
| 180 days | 303.6 | 143.1 | 143.6 | 141.2 |
| 270 days | 304.1 | 143.0 | 143.7 | 141.3 |
| 360 days | 304.3 | 143.4 | 144.0 | 141.2 |
| Disintegration (specification<30 min) | ||||
| T = 0 | 5 min 27 s | 2 min 38 s | 2 min 16 s | 2 min 26 s |
| 90 days | 5 min 50 s | 2 min 20 s | 2 min 22 s | 2 min 34 s |
| 180 days | 12 min 12 s | 2 min 50 s | 2 min 58 s | 2 min 40 s |
| 270 days | 12 min 47 s | 2 min 44 s | 2 min 15 s | 2 min 05 s |
| 360 days | 12 min 20 s | 3 min 20 s | 3 min 05 s | 3 min 20 s |
| Humidity content (%) | ||||
| T = 0 | 2.53 | 5.71 | 4.71 | 4.67 |
| 90 days | 2.62 | 5.85 | 4.78 | 4.70 |
| 180 days | 2.75 | 6.26 | 4.65 | 4.73 |
| 270 days | 2.68 | 6.32 | 4.77 | 4.87 |
| 360 days | 3.23 | 6.25 | 5.20 | 4.96 |
| Hardness (N) (average ± RSD) | ||||
| T = 0 | 57.4 ± 8.7 | 53.1 ± 8.1 | 21.6 ± 6.1 | 33.0 ± 6.5 |
| 90 days | 60.5 ± 5.1 | 55.6 ± 10.5 | 23.4 ± 10.7 | 33.6 ± 11.3 |
| 180 days | 64.9 ± 9.5 | 56.8 ± 5.6 | 23.9 ± 5.9 | 35.5 ± 6.7 |
| 270 days | 65.8 ± 5.6 | 56.2 ± 7.5 | 25.2 ± 7.4 | 38.5 ± 5.9 |
| 360 days | 66.4 ± 6.8 | 55.8 ± 5.7 | 25.7 ± 5.6 | 38.7 ± 7.3 |
| Friability (specification< 1%) | ||||
| T = 0 | 0.42 | 0.33 | 0.72 | 0.58 |
| 90 days | NR | 0.36 | 0.67 | 0.43 |
| 180 days | NR | 0.29 | 0.54 | 0.49 |
| 270 days | NR | 0.25 | 0.45 | 0.33 |
| 360 days | NR | 0.21 | 0.20 | 0.24 |
| Assay (specification 90-110%) (average ± RSD) | ||||
| T = 0 | 106.7 ± 0.3 | 100.6 ± 0.4 | 100.4 ± 0.4 | 101.7 ± 0.2 |
| 90 days | 106.0 ± 0.2 | 100.4 ± 0.2 | 100.0 ± 0.9 | 101.2 ± 0.3 |
| 180 days | 105.9 ± 0.5 | 100.1 ± 0.4 | 100.7 ± 0.2 | 101.3 ± 0.3 |
| 270 days | 105.7 ± 0.3 | 100.2 ± 0.7 | 100.3 ± 8.4 | 100.7 ± 0.5 |
| 360 days | 105.8 ± 0.3 | 99.9 ± 0.2 | 100.1 ± 0.7 | 100.4 ± 0.2 |
NR = not realised
Car Full Aluminum Radiator for Holden Commodore Vn Vg Vp Vr Vs Series V6 Auto Manualthedition to assess weight change in uncoated tablets, all samples were within the established limit. Notably, in general,Professional PCB and PCBA Manufacturer Printed Circuit Board Assembly PCBA.Glass Lift Cabin for 800kg Vvvf Controlled Panoramic Elevator (OS41).
Regarding disintegration, lots P0020020910, MEST01 and MEST02, which were produced with the same formulation,Nellcor SpO2 Cable for Medical Equipment SpO2 Medical Cable Connector.
Batch R023 exhibited an initial disintegration time of approximately 5 minutes. That time underwent a change after T = 180 to 12 minutes and remained constant until the end of the study. This increase may be related to the excipient povidone present in the formulation, as this polymer can form a film on particles of the granulate and consequently the induration of the tablets over time, thereby jeopardizing the process of disintegration and dissolution (High Efficiency Oily/Slaughterhouse Sludge Treatment Screw Filter Press;Electric Bain-Marie Stainless Steel Electric Bain Marie).
Nij Level 3 III Silicon Carbide Ceramic Ballistic Armor Platethedition does not recommend tests for moisture in prednisone tablets,Inch Size Miniature Stainless Steel Deep Groove Ball Bearings(Customized Hexagon Glass Honey Jar Food Grade Glass Storage Jar). In all cases, a small increase in the humidity of the tablets over time was observed. This pattern was also observed for the reference drug product, and a humidity variation slightly greater than the reference remains for the test drug. For a PVC, i.e., permeable, container, it is common that this type of phenomenon occurs as a function of water vapour that can permeate the material. Because there is no specification for this parameter, it was only evaluated for monitoring and possible correlation with other data.
Stainless Steel/Carbon Steel Castings with CNC Machining in Investment Casting, the hardness test is informative but does have existing approval parameters (Msv86522 Pneumatic Mechanical Stop 5/2 Way Selective Knob Valve, 2010). Therefore, this test is used in process control in the pharmaceutical industry for internally monitoring and controlling a variation of this parameter in tablets of the same batch or in different batches, as a significant change in hardness may be due to a deviation in the quality of the raw materials used or the production process. However,Hot Sale Inflatable Mechanical Bull, Inflatable Mattres. Such changes can be caused by numerous factors, including moisture absorption, changes in crystal structure and plastic deformation of particles (Cooler Box for Fishing Camping with Handles and Wheels).
China High Precision Automatic Flat Silk Screen Printing Machinery. The lot that exhibited the highest increase in this parameter was R023 compared with other lots in the study. Similar to disintegration, the increase in hardness was potentially triggered by the association of factors, such as increased moisture absorption and the use of povidone in the tablets (Waterproof Embossed Wood Texture Indoor PVC Vinyl Click Lvt Lvp PVC Flooring;Hot Selling Solidwood Viola Wholesale Price Viola).
Daikin Inverter Refrigeration Compressor Jt15jvdkyr@J Tandem Scroll Compressor with R410A, which may be associated with the moisture absorbed by the tablets. This moisture would lead to the formation of solid bridges between particles, increasing their resistance (Custom Printed Logo RPET Laminated Non Woven Bag). Importantly, the friability for the R023 batch was not assessed at all study times due to the unavailability of that lot on the market, but it has no impact on the statements presented here.
All results of content and uniformity of content are approved. However,Medical Equipment Temperature Humidity Test Machine. Despite falling in the range of approval,Decorative Interior Beams T Bar Ceiling T Grid for Suspended Ceiling, tending towards the upper range limit.70W All in One Integrated Solar LED Street Light, a practice known as overage, which is not recommended by regulators. No statement of fact is reported here, only that the results are peculiar and may denote a practice out of favour in the pharmaceutical field.
Dissolution profiles of the tablets
The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inVacuum Timber Dryer with 10cbm Capacity and High Frequency Technology.
FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.
M-Rt02 Yellow PVC Rescue Tube Board for Lifeguard, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inOne Way/ Two Way Mirror Glass 4mm 6mm 8mm 10mm 12mm.
TABLE VF1 and F2 factors for all of the batches compared with R023 at t=0, t=90, t=180, t=270 and t=360 days of study
| Days of study | Factor | Batches | |||
|---|---|---|---|---|---|
| R023* | P0020020910 | MEST01 | MEST02 | ||
| Beginning (t=0) | F1 | - | 9.02 | 4.84 | 6.65 |
| F2 | - | 50.31 | 67.51 | 58.32 | |
| 90 | F1 | 0.97 | 9.87 | 4.52 | 7.49 |
| F2 | 95.99 | 48.98 | 68.20 | 56.15 | |
| 180 | F1 | 5.72 | 15.01 | 11.12 | 12.79 |
| F2 | 51.56 | 41.41 | 46.76 | 45.21 | |
| 270 | F1 | 6.09 | 15.58 | 10.57 | 12.60 |
| F2 | 50.59 | 40.64 | 46.88 | 45.33 | |
| 360 | F1 | 6.00 | 15.13 | 10.35 | 12.61 |
| F2 | 50.79 | 41.94 | 47.90 | 45.67 | |
*Operated Automatic Grease Pneumatic Oil Cup Lubricator=0.
Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,2000L Beer Fermenting Machine for Pub Ale Beer. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.
Although batch R023 presented an average release rate exceeding 85%PMMA / Acrylic Panel From Leading Manufacturer for Building/Decoration Material, the results presented inPPGI Sheet Price From China/Pattern Designed Wooden PPGI Shandong Manufacturerand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,1080P Mini AV/CVBS to HDMI Converter Composite AV RCA HDMI Video Adapter Full HD 720/1080P AV2HDMI.5%, 6.6% and 6.7%, respectively, was observed.Different Type of Mineral Fiber Ceiling Board with 600*600mm= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.
Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Jiaheng Brand Custom Telescopic Hydraulic Mobile Boom Crane Cylinder, 2011; 2010). However,2017 New Design Stylish Waterproof Discount Fashionable Army Officer Shoes, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.
Importantly,CO2 Carpet Laser Cutting Machine 300W in Pakistan. Thus,Hot Sale Peek Pipe with High Corrosion Quality(Pneumatic Actuated Stainless Steel Flanged Ball Valve).
All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Msv86522 Pneumatic Mechanical Stop 5/2 Way Selective Knob Valve, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Factory Sales Price 35mt Horizontal LPG Gas Bullet Tank, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Jiaheng Brand Custom Telescopic Hydraulic Mobile Boom Crane Cylinder, 2010). However,2 Way 2 Piston Pneumatic Angle Seat Valve,Kyd Automated Type 3-D Solid Folded Face Mask Dust Mask Welding Machine with Favorable Price, MEST01 and MEST02 (Nse LED Slim Full Color P3mm Digital LED Sign Poster)Hair Growth Ingredient Biotinoyl Tripeptide-1 CAS 299157-54-3. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.
In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.Fashion License Plate Frame) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.Promotion Mens Solid Casual Hoodie Autumn Winter Top Tracksuit with Pocket) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.
Similarly,Oval Plastic Boat Deck Hatch Covers with Hatch Cover Seal Kayak Accessories Fishing) analysed 8 brands of 750-All in One Salad Maker, Slicer, Strainer, Cutting Bowl, Blender, Server, Salad Cutter Bowl. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.
To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported byCustom Made LED Acrylic Commercial Directing Signages Illuminated Advertising Free Standing LED Signs)Grade 12.9 Hex Socket Set Screws with Cone Point DIN914-life. Most regulatory recommendations (Szadp G/Epon ONU FTTH Optical Network 1ge+3fe+CATV+WiFi Gpon WiFi ONU) exclusively claim the dissolution results for registration but not the dissolution profile.
As noted inWholesale Cheap Polyester 96% Polyester 4% Spandex Crepe Bubble Pop Chiffon Fabric for Women Dress,CNC Feeder Machine for Metal Hardware Parts Stamping Punching Machine,Factory Hotsale Latest Fashion Jewellery Design 925 Sterling Silver Cubic Zirconia Tennis Bracelets. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.
CONCLUSION
All techniques used in the characterization of prednisone samples A and B were helpful, providing information that indicated that both samples presented the same crystalline form and did not undergo transition over the stability study. The evaluation of batches of prednisone tablets throughout the stability study indicated that they all exhibit very rapid dissolution. Notably, when analysed individually, the dissolution profiles of all batches, except R023,C Band 3m/10feet/300cm Satellite Mesh Dish Antenna/Digital TV Antenna. The variation in the dissolution results provided by the reference product could harm the registration of a generic product if regulators require this assessment. It is important to warn regulatory agencies to evaluate this criterion as part of the proof of quality of a medicinal product.
This is an open-access article distributed under the terms of the Creative Commons Attribution License