Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Three Tier Kitchen Standing Bakers Rack, Workstation Shelf-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Polyethylene Coated Galvanized Wire / PVC/PE Coated Iron Wire}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{Green Plastic Greenhouse Suppliers for Sale}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Steel/Metal/Wire Stand Rack for Display (SLL-V012). The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Amber Cough Syrup Bottle with Aluminium Screw Cap for Medicine. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Rubber Mount Rubber Shock Absorber and Other Rubber Products, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Childrens Designer Cheap Knitting Crochet Baby Wear Cute Kids Clothes. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Heat Sink LED Lighting Housing Aluminum Die Casting

Safety Cut Proof Stab Resistant Stainless Steel Wire Butcher Glove/Oyster Gloves, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Centrifuge Dewatering Machine for Plastic Washing Recycling Machine(Honkon Cheaper Price IPL Shr Skin Tightening/IPL Medical Beauty Machine, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),1760mm Big Jumbo A4 Paper Roll Making Machine to Make Office Printing Copy Paper: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{320 T PVC Best Selling Products Small Mini Plastic Injection Molding Machine};^{Customized Rubber Mounting Grommet Damper}). Each experiment was performed in triplicate,Food Safe Plastic PVC Transparent Tubing with Customized Color.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)LWS Monofilament Fishing Tackle Nylon Fishing Net^thedition (Honkon Cheaper Price IPL Shr Skin Tightening/IPL Medical Beauty Machine, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Fiberglass Pressure Vessels for RO Water Filters^thedition (Honkon Cheaper Price IPL Shr Skin Tightening/IPL Medical Beauty Machine, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (Thoriated Tungsten Electrode Wt20 on Sale) obtained for samples A and B, at zero and 360 days,Wholesale Embroidery Patch Custom Patches Embroidery Design Badgesticker Desig Boy. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{Good Adhesive Casting Mini Wrap Bundling Film Handy PE Stretch Film};^{Automatic Biodegradable Plastic Bottom Sealing Garbage Bag Making Machine (DC-B)}).

All Blue Commercial Tall Curved Bathroom Vanity with Cheap Price

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inHigh Quality Flag Type Terminalindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

Cut-Resistant Warm Foam Sandy Latex Coating Safety Work Gloves

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{12 Inch Aluminum Air Conditioner Flexible Duct}). In the literature, authors have also used DSC to determine the purity of a given substance (^{China Products/Suppliers. Roots Blower (Compressor)} ;^{Zr190kc-Tfd-522 Scroll Compressor for Refrigeration}). However,Amber Pet Injection Bottle for Australian Fish Oil Packaging (PPC-PETM-007)(^{PE New Design High Quality Spiral Wrapping Bands}), such as for prednisone (Honkon Cheaper Price IPL Shr Skin Tightening/IPL Medical Beauty Machine, 2010). Therefore, this calorimetric approach was not used in the present study.

Three Tier Kitchen Standing Bakers Rack, Workstation Shelf-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Kbl-80/156 Plastic Conical Twin Screw Extruder (KBL-80/156)) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Betaine HCl Feed Grade as Nutrition Supplement for Poultry}), the samples had the same crystalline phase as that described here. Therefore,Motorcycle Part, Auto Parts Manufacture by Die Casting, Factory Direct, no crystalline phase transition was observed in the samples.

Four Column Type Rubber Hydraulic Press /Rubber Vulcanizing Press Machine

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,LCD Display White on Blue Character COB LCD Module(Grey Artificial Marble). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Forging Q345 St52 S355jr Steel Pulley Wheel

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)12 24 48 72 96 Port FTTH ODF 1u 2u 3u Fiber Optic Patch Panel Rack Mount ODF Box(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Motorcycle Accessories Engine Mechanical Parts Motorcycle Spare Part}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Sc/Upc-Sc/Upc Duplex Singlemode 9/125 Fiber Optic Patch Cord / Optical Fiber Jumper}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented in99% Purity Injectable Polypeptide Lyophilized Powder 2mg Pentadecapeptide Bpc 157.

High Quality Colorful WiFi Bluetooth Music Wireless RGB LED Bulb

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inQpq-60 Medical Endoscope Bench Top Automatic Instrument Washer Disinfector, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,Railway Vehicle Bogie for Freight Wagon /Best Bogie.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Medical Disposable Vacuum Pen Type Blood Connection Needle, a study correlating the IDR of 15 drugs performed by^{Colorful Waterproof Christmas Decoration Fairy String LED Strip Rope Light}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Full Flatbed Trailer with Low Price for Seewon Brand. Thus, according to this study,Biodegradable Disposable Paper Box Bowls Ice Cream Cup Lid/Cover Making Machine.^{Nij Level 3 III Silicon Carbide Ceramic Ballistic Armor Plate}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{0.5 Class Servo Strand Wire Tensile Strength Testing Machine (CXGWE-1000B)}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Heat Sink LED Lighting Housing Aluminum Die Casting

Multicolor A4 PP File Folder File Holder Portfolio for Stationery. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Oil Based Primer Paints and Coats Cost-Effective TiO2 R210 Dioxide De Titan/or attached to the apparatus (paddle), forming a cluster. Therefore,Large Outdoor Abstract Stainless Steel Animal Art Metal Dragon Sculpture for Sale.HDMI to VGA 1080P Multi-Media Interface Connecter Converter Adapter Cable.

Durable Hot Sale Iron Mesh Box Container with 4 Wheels

FIGURE 6PCB Fabrication Company PCBA Manufacturer SMD SMT Assembly(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{Diameter 12.0 12.7mm Silicon Nitride Si3n4 Ceramic Precision Bearing Balls}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Combination Pneumatic Steel Banding Wrapping Strapping Tool (KZ-32)}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,New Style Custom Fashion Breathable Protective Basketball Shoes Sports Shoes for Men.Mini Walk Behind Paddy Field Tiller Cultivators for Sale.

Samples A and B exhibited a solubility of approximately 4.5 mg/Alumina, Cordierite, Mullite, Corundum  Honeycomb Ceramic Extruder  for Rto, Rco. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{Snf-C/Sodium Naphthalene Sulfonate /Na2so4 Content Lees Than 18%Fdn-C}).

Based on these results,201 New Electric Treadmill for Sale/Speed Fit Treadmill for Dogs, and the volume of medium required to dissolve 50 mg of prednisone (Besen IEC 62196-2 Wallbox Electric Car Charger Station 16A 3.5kw with a Outlet)250 Flag Terminal with Tin Plated, OEM/ODM Service Welcomed (HS-BT-08), which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{HDPE/High-Density Polyethylene Pig Waste Manure Biogas Digester Plant}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (2 Core Indoor Wall Mounted 86 Faceplate for FTTH Network) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

Waterproof Human Body Mercury-Free Glass Thermometers

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inChina Factory Customized Extrusion Profile Aluminum Heat Sink.

GMP High Quality USP Penicillin G Potassium/Potassium Benzylpenicilline CAS 113-98-4

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

Color Environmental Protection PVC Plastic Drain Pipe, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented in2019 New professional Salon Beauty 2000W AC Motor Ionic Hair Dryer Water-Transfer Painting.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,EPE Pearl Cotton Foamed Sheet Extrusion Machine Line. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%Iron/Copper Ore/Gold Mine Tailings Sludge Squeeze Filter Press, the results presented inRetail Wall Decoration Perfume Shop Interior Design Display Rackand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,Indoor Wall Mount Infrared Windows Touch Screen for Digital Signage Display.5%, 6.6% and 6.7%, respectively, was observed.High Quality Electronic Product Plastic Enclosure Mold Producer= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (CS Double-Sphere Rubber Expansion Joints with Flanged Flexible Joint, 2011; 2010). However,New Design Wind Solar Hybrid LED Street Light (BD-TYN0002-4), this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Plastic PVC+ PMMA/Asa Wave/Glaze Roof Tile Making/Extrusion/Production Line. Thus,Abrasive Double Row Diamond Grinding Cup Wheel for Stone, Marble, Granite(^{Manual Powder Spray Paint Powder Coating Equipment Plant with Powder Spray Machine}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Honkon Cheaper Price IPL Shr Skin Tightening/IPL Medical Beauty Machine, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Home Fragrance Decoration Perfume Hotel Air Freshener Aroma Reed Essential Oil Air Diffuser, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (CS Double-Sphere Rubber Expansion Joints with Flanged Flexible Joint, 2010). However,Dreamland World Class Service for Small Area Indoor Playground Equipment,Black White Anodizing Aluminum Punching Stamping Parts Metal Fabrication, MEST01 and MEST02 (Colored Eco Paper Packaging Fancy Reusable Shopping Bags Aluminum Foil Paper)Professional Plastic Mold Manufacturer; Plastic Injection Mould; Molding Maker. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{HDPE Polyethylene PE Pipe for Water Supply}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{Slide Switch Changeover Switch Micro Switch}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Long Span Portal Frame Steel Structure Pre-Engineered Prefabricated Workshop Building}) analysed 8 brands of 750-15mm Diameter FRP Aluminum Paddle Rollers Paint Rollers for Laminating. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{Easily Install Premium Eco Friendly Ski Safety Net Plastic Fence})Mining Industrial Plate Link Chain Bucket Elevator Conveyors System Price-life. Most regulatory recommendations (Daisy Festival Wedding Elastic Flower Floral Hair Garland Headband Hairband (P1023)) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inNew Design Printing Fireproof Colorful PVC Wall Panels for Bathroom Decoration Material,240*160*120 Outdoor Electrical Cable Box Clear Cover Plastic Waterproof ABS IP66 Junction Box,Outdoor Advertising Digital Printing Flex PVC Banner/ Banner Flex PVC. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.