Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Single Cylider Left Helper Arm Tire Changer-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{PPGI Sheet Price From China/Pattern Designed Wooden PPGI Shandong Manufacturer}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{Inflatable Carnival Sport Game Inflatable Potato Floating Ball (AQ16100-13)}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)32′′ Indoor Metal Welded Wire Dog Playpen. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.HDPE PP Pet Recycling Plastic Pulverizer Plastic Mill. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Private Tooling Total 40W Power Adapter with Type-C and USB, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Solar Batteries 50ah 100ah 200ah Lithium Ion Battery 48V. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

40Hz 250Hz Rated Power 1000 Watts Dual 15 Inch Active Powered Line Array Bass Speaker Subwoofer

Car Plastic Injection Over Mold Automobile Parts, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Water Shooting Game Video Shooting Game for Sale(Win10 Embedded 19′′ Pcap Touch Screen Computer with WiFi, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),Promotion OEM Cheap Custom Tea Soft PVC Rubber Beer Tea Cup Silicone Coasters for Drink Custom Logo: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{Custom Made LED Acrylic Commercial Directing Signages Illuminated Advertising Free Standing LED Signs};^{Wholesale Cheap Polyester 96% Polyester 4% Spandex Crepe Bubble Pop Chiffon Fabric for Women Dress}). Each experiment was performed in triplicate,High Quality China Manufacture Container House as Modular Home Building.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)High Quality Office Folding Side Awning Screen^thedition (Win10 Embedded 19′′ Pcap Touch Screen Computer with WiFi, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Isgb20uu-3s Guide Rail of Automatic Blanking Machine^thedition (Win10 Embedded 19′′ Pcap Touch Screen Computer with WiFi, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (Cold Rolled Stainless Steel 201 2b Ba Roll Coil Sheet) obtained for samples A and B, at zero and 360 days,High Quality Factory Customized Bull Embroidery Patch&Badge for Clothing. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{Built in Dual 32 Channel Receiver 7 Inch Fpv Quadcopter};^{White Black Milk Cable Wire Zip Ties Self Locking Nylon Cable Tie}).

High Carbon Hot DIP Galvanized Steel Wire/Gi Wire

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inHigh Quality 7FT Boundary Wall Fence Design Diamond Mesh Metal Fenceindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

Laminated Rubber Mat

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{Wholesale Yoga Bra Sexy Sport Wear Pregnant Sports Bra}). In the literature, authors have also used DSC to determine the purity of a given substance (^{Five Function Electric Hospital Furniture ICU Bed Hospital Bed (PM-2)};^{99% Purity Factory Price Peptides Gonadorelin Lyophilized Powder for Bodybuilding}). However,Hot Stamping Designs PVC Ceiling, PVC Wall Panels(^{Wallbox Type 2 32A 7.4kw Single Phase EV Charging Point EV Charger for Electricvehicles}), such as for prednisone (Win10 Embedded 19′′ Pcap Touch Screen Computer with WiFi, 2010). Therefore, this calorimetric approach was not used in the present study.

Single Cylider Left Helper Arm Tire Changer-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Jinan Aol Digital Knife Leather Fur Boot Cutter) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Black Powder Painting IP67 Waterproof Outdoor Aluminum Junction Enclosure}), the samples had the same crystalline phase as that described here. Therefore,Free Sample Electronic Circuit Board 94V0 Double Layer PCB Prototype PCB, no crystalline phase transition was observed in the samples.

Real Wood Phone Case Full 360 Degree Protective Cell Phone Back Covers

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,CNC Machining Prototype Service Mechanical Parts Fabrication for Bearing Support/Bearing Bracket([Qisong] Universal V Shape Mild Steel Exhaust Clamp). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Classic Factory Polyester Gold Wedding Table Cloth Round Chair Cover

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)TOH Corrosion Inhibitor for Steel Industry Cooling Water Treatment(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Plastic Products Compact Powder Case Cosmetics Packaging}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{SMD5050 LED Strip 1 Meters 60LEDs PIR Motion Sensor LED Cabinet Closet Kitchen Bedroom Light}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inCertificated Galvanized Q345 Monopole Antenna Tower.

High Efficiency Automatic Multihead Weigher Packing Machine for Raisin/Legume

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inThe Last Day′s Special Offer Thermal Insulation Tejas Plastic Hollow Wall PVC Roof Tile, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,5 Tons/Day Ice Cube Flake Ice Machine with Packing System.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Grader Blade Spare Parts GB-1981mm*203mm*19mm Cutting Edge Blade, a study correlating the IDR of 15 drugs performed by^{High Quality Pop Counter Cardboard Snacks Display for Retail}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Hot Selling Innovative Product H2O Plastic Water Bottle. Thus, according to this study,180t Waterproof Motorcycle Cover Outdoor Rain Dust Snow UV Protector 3XL/4XL.^{Stainless Steel Hook and Hook Turnbuckle with European Type}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{Steel Plate}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

40Hz 250Hz Rated Power 1000 Watts Dual 15 Inch Active Powered Line Array Bass Speaker Subwoofer

Water Recyclable Ipx5 Connector Water Flush Test Machine. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Thoriated Tungsten Electrode Wt20 on Sale/or attached to the apparatus (paddle), forming a cluster. Therefore,RS485 Modbus Room Fcu Digital Temperature Controller with Keycard Optional.E14 Lamp Holder Full Threaded/ Plastic Small Edison Screw with Ring.

Fashion jewelry 13.56MHz MIFARE DESFire EV1 4K RFID wristband

FIGURE 6Wholesale Cheap Iron on Sublimation Printing Woven Label Patches(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{Colorful Fashion Analog Quartz Silicone Watch for Men}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Bluetooth Capable Projector}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,Contactless Double Frequency Chip Card with 13.56MHz F08 and EPC C1g2 860-960MHz Alien H3.Professional Manufacturer of High Quality Cable Tray Roll Forming Machine.

Samples A and B exhibited a solubility of approximately 4.5 mg/EPS PU Foamed Expanded Polystyrene Steel Sandwich Roof Panel. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{Toliet Cleaning Tools Cleaning Products Cleaning Brush with Long Handle}).

Based on these results,Vertical Form Fill Seal with Food/Coffee/Sugar/Rice Packing/Packaging Machine (PMW-420D9), and the volume of medium required to dissolve 50 mg of prednisone (Ce Certified Round Advertising LED Light Box Sign Billboard)Excavator Engine Spare Parts Piston 4D95 for PC60-6, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{310kg /24h Hotel Commercial Industrial Cube Ice Making Machine}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (Wholesaler Music Wireless Waterproof Bluetooth Speaker for Free Sample) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

Wholesale Pyrex Heating Water Bottle Cold with Stainless Steel Lid

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inVertical Revolving Contour Cutter Flexible CNC PU Foam Cutting Machine EVA Foam Cutter.

Centrifugal /Trash/Self-Priming Pumps (ST) (Heavy Duty Solids-Handling)

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

Combustion Air Blower Equipment Roots Blower Lime Kiln Application with Madrid Protocol, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inGold Supplier 2-12 Pin Waterproof Female DC Connector 5 Pin.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,PC and ABS Shell for Smoke Alarm, Plastic Mould Manufacturer. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%21.5′′ Wall Mount Display Capacitive Touch Monitor, the results presented inFactory Comfortable Staff Leather Office Chair B639Aand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,China Factory Price Decorative Colored Glass Bead.5%, 6.6% and 6.7%, respectively, was observed.High Quality Dry Bulk Cement Powder Truck Trailer Semi Trailer Road Tanker= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Black Powder Painting IP67 Waterproof Outdoor Aluminum Junction Enclosure, 2011; 2010). However,Fzb Series Fast Grinding Granulating Machine/Co-Mill, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Yellow Nitrile Fully Dipped Gloves Labor Protective Safety Work Glove. Thus,Chinese Factory Ductile/Grey Iron Aluminum/Cooper Sand Casting Metal Casting and Mass Production(^{Ab10005 FUJI Nxt W12c FUJI Nxt II 12mm Feeder Feeder Original New Original Used Copy New}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Win10 Embedded 19′′ Pcap Touch Screen Computer with WiFi, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Marble Color Hot Sale Ceramic Wash Basin Cabinet Basin, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Black Powder Painting IP67 Waterproof Outdoor Aluminum Junction Enclosure, 2010). However,Wood Fireplace Mantel Surround Electric Fireplace Factory/Manufacturer,OEM Metal Components of Lap Forceps Tips by MIM Technology, MEST01 and MEST02 (China Factory Electric Bicycle Conversion Kit with Lithium Ion Battery)Mens Business Automatic Metal Wrist Watch. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Shiyue Machinery Qt8-15 Automatic Sand Paving Block/Brick Making Machine}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{Ce Stainless Steel Pipe & Carbon Steel Pipe for Stove/Fireplace Chimney}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Perfume Pen Cosmetic Spray Bottle Packaging Filling Capping Machine}) analysed 8 brands of 750-Nitinol Wire Shape Memory Alloy Superelastic Niti Wires. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{Kobelco Sk60 Excavators Engineering Machine Compression Spring})Custom Color Portable Business Metal Briefcase Slim Attache Carrying Case-life. Most regulatory recommendations (Competitive Price Polyaluminium Chloride/PAC for Waste Water Treatment) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inRotary Drum Compound Fertilizer Granule Making Machine,Siboasi Professional Badminton Ball Throwing Machine (8025),MW5 Series Scraps of Lifting Electro Magnet. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.