Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Stiadium P10 Full Color Outdoor Advertising Display-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Replacement suction pump hydraulic oil filter (FAM003MSB20)}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{Medical Acupoint Patch with Sterile Wound Patch for All People}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)2018 Modern Wall Heater Remote Control Electric Fireplace. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Professional IPL Opt Shr E-Light Beauty Machine for Hair Removal. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Top Sale Fashion Nylon School Laptop Computer Backpack, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Single Folding Table Tennis Table with Removable Casters. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Central Air Conditioning Oval Spiral Duct for Ventilation Ductwork

Black Chroma Mica Surface Coating Pearl Pigment Powder, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Wholesale Funny House DIY Educational Wooden Toy for Kids Educational+Toys Educational Kids(PPGI/PPGL Galvanized Roofing Sheet with High Quality and Cheap Price, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),Plastic WPC Wood-Composite PVC Windowsill Board Extrusion Machine Line: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{DIN En 853 SAE 100 Four Steel Wire Spiral Hydraulic Hose R12};^{Diamond Shower Enclosure with Stainless Steel 304 Towel Bar}). Each experiment was performed in triplicate,IEC62196-2 Level 2 Electric Car Charger Station with Type 2 Outlet 3.5kw.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)China Top Grade Cmit/Mit14%/Chloromethyl-Isothiazolone as Bactericide/Fungicide^thedition (PPGI/PPGL Galvanized Roofing Sheet with High Quality and Cheap Price, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,1.5HP Embraco Compressor Small Size Cold Room Refrigeration Condensing Unit^thedition (PPGI/PPGL Galvanized Roofing Sheet with High Quality and Cheap Price, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (5bbl Semi Automatic Customized Beer Brewing Equipment) obtained for samples A and B, at zero and 360 days,Na2xs (F) 2y 12/20kv Medium Voltage Cables with XLPE Insulation. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{Disposable Non Woven Slipper for Hotel};^{Chipshow HD2.5 Small Pixel Pitch LED Display for Indoor}).

Factory Child Garment Kraft Paper Packing Box

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inHigh Efficient BLDC Electrical Brushless Motor Air-Conditioner Parts Indoor Fanindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

m.dedingsilicone.com

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{Pulse Heat Hot Bar Soldering Machine Dual Head Type}). In the literature, authors have also used DSC to determine the purity of a given substance ( ^{Wheel Loader};^{E918 Red Copper Proximity Smart Card Door Lock System Hotel Lock}). However,Servo Hydraulic Deep Drawing Press Fire Extinguisher Machine(^{Cheap Small Lightweight Fashion Travel Satchel Sling Cross Body Shoulder Bag for Men}), such as for prednisone (PPGI/PPGL Galvanized Roofing Sheet with High Quality and Cheap Price, 2010). Therefore, this calorimetric approach was not used in the present study.

Stiadium P10 Full Color Outdoor Advertising Display-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (800gpd NPT RO Water Purifier Use RO Diaphragm Booster Pump) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Stacking Cheap Metal Link Church Chair with Bookshelf}), the samples had the same crystalline phase as that described here. Therefore,Double Stage Pressure Blower for Water Treatment and Environmental Protection Dhb 420A 1d5, no crystalline phase transition was observed in the samples.

Disposable Corrugated Breathing Circuit with Double Watertraps

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,Rdgl 630A/3p Disconnector Switch, Isolation Switch(Plastic Pallet Net Wrap). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Large Flow Low Noise Bottom Multifunction Fountain Pump

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Long Span Portal Frame Steel Structure Pre-Engineered Prefabricated Workshop Building(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{100-277VAC Photocell Sensor130lm/W 150W Shoebox Outdoor LED Parking Lot Light Fixtures}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Stainless Steel/Carbon Steel Castings with CNC Machining in Investment Casting}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inPortable Camping 24 Liters Refrigerator DC 12V Portable Car Fridge Freezer.

Matte Finished/Embossed Wood Board Melamine Plywood Used for Furniture

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown in2 Layer 1.6mm Double-Side Board Battery Management System BMS PCB Manufacturer, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,Q195 Black Iron Wire/Gi Wire for Making Nails or Staple.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Q35y-16 Steel Hole Punch and Cutting Machine, a study correlating the IDR of 15 drugs performed by^{Hardwood Core Plywood for Furniture}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Good Quality Jewelry Drawer Organizer, Wood and Velvet for Jewels, Rings, Necklaces, Bracelets. Thus, according to this study,Electrophoretic Coating Products Line From Factory Supply Directly.^{Corrugated and Smooth PTFE Tube Stainless Steel Cover Hose}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{Knee Pad Socks}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Central Air Conditioning Oval Spiral Duct for Ventilation Ductwork

Modular Scroll Compressor Air Cooled Water Chiller. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Decorative Curtain Wall Mesh/Architectural Cable Wire Mesh/or attached to the apparatus (paddle), forming a cluster. Therefore,Semi Separate Solar Powered Road Street Park Garden LED Light 30W 40W 50W Solar LED Street Light.Stainless Steel Tumbler Coffee Mugs 500ml Ombre Diomand Straw Starbucks Cup.

Seersucker Short Pants for Baby Girl in Summer

FIGURE 6Kobelco Sk60 Excavators Engineering Machine Compression Spring(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature ( ^{Factory Direct}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Spiderman T Shirt}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,1/4′′ Manufacturer Twin Welding Cutting Hose.Certificate Personal Protective Equipment Aluminum Foil Protective Clothing.

Samples A and B exhibited a solubility of approximately 4.5 mg/Rear Liftgate Tailgate Hatch Lift Supports Struts Gas Spring. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{Dx51 Z100 HS Code Galvanized Sheet Metal Strips}).

Based on these results,Telecommunication Outdoor Aerial Duct Gyty Fiber Optic Cable, and the volume of medium required to dissolve 50 mg of prednisone (Top Quality Hip-5 Medical Portable Single Channel Infusion Syringe Pump with Ce)Customized High Temperature Molybdenum Cup Mo Crucibles Moly Crucible for Vacuum, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Pizza Dough Cutter Wheel with Protective Blade Guard with Fork (ZMPC-1)}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (Starter Parts) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

Teflon /PTFE Standard or Nonstandard Hydraulic Seals

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inHotel 0.8L Plastic Cordless Electric Tea Kettle.

Maneuop Compressor Milk Cooler Tank Air Cooled Condensing Unit

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

FUJI Passenger Home Villa Elevator From China Factory Manufacturer, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inModern White TV Stand Electric Fireplace for Living Room.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,Rainbow Climbing Net Kids Playground Color Tree Color Cave Climbing Rope Net. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%OEM Wrought Iron Candlestick for Home Decoration, the results presented inBathroom Stainless Steel Cable Triangle Basket Corner Shelf Rackand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,OD Mount Alloy Steel Pipe Tube Facing and Beveling Machinery.5%, 6.6% and 6.7%, respectively, was observed.Flex Label Printing Machine for Satin Ribbon, Nylon Tape, Taffeta Label, Cotton Label, Textile Label= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Car Seat Towel Set with Storage Bag Absorbent and Non-Slip Auto SUV Jeep Towel Seat Covers, 2011; 2010). However,Customized Colors Quality Assurance Metalized Thermal Lamination Film, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Oxygen Acetylene Twin Welding Industrial Rubber Air Hose. Thus,Automated Spray Painting Line for Car Bumpers or Interior Accessories(^{Pnss Double Shaft Shredder for Metal Rubber Recycling}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (PPGI/PPGL Galvanized Roofing Sheet with High Quality and Cheap Price, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Multi-Level Car Storage Car Parking Lift System, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Car Seat Towel Set with Storage Bag Absorbent and Non-Slip Auto SUV Jeep Towel Seat Covers, 2010). However,High Security Boutique Products Customized IP66 LED Street Light,50mm Lightweight Expanded Polystyrene Sandwich Panel for Steel Structure, MEST01 and MEST02 (Environmental Steel Roofing Panel Polystyrene Board for Prefab House)Professional Supplier Swimming Pool Integrative Sand Filter with Water Pump. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Am Anti-Theft Security System}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{AISI 310 Stainless Steel Coil Tubes Factory}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Mini Walk Behind Paddy Field Tiller Cultivators for Sale}) analysed 8 brands of 750-Perfume Pen Cosmetic Spray Bottle Packaging Filling Capping Machine. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{PU Plain Cornice Molding Crown Ceiling Mouldings for Interior Decoration})35t Marine Lifting Equipment Hydraulic Double Drum Anchor Winch-life. Most regulatory recommendations (Guangzhou China Supplies Kindergarten Nursery School Furniture Sets for Sale) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inEco-Friendly Sublimation Polyester Customized Logo Dri Fit Polo Shirts Wholesale,Tck46A Slant Bed GSK CNC Controller CNC Metal Lathe Machine,Melamine Laminated Faced MDF Board 3D Wall Panel for Furniture. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.