Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

17inch Colorful Buffing Polishing Abrasive Waxing Floor Cleaning Pad-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Electric Vehicle 4 Seaters Small Electric Golf Car Golf Buggy with Ce Certification}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{3-Oxopentanedioic Acid}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Ce RoHS FCC Shop Advertising Neon Illuminated LED Open Sign. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Precision Aluminum Auto Parts CNC Machining Plastic Injection Mold Parts. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Electroplating External Spring Cosmetic Packaging Press Airless Bottle., 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Automatic Vertical Powder Pouch Packing Machine for Coffee Powder, Chili Powder, Flour. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Energy Saving Small Induction Furnace for 5kg Gold (GY-15A)

Mirror Screw Neodymium Countersunk Round Magnet with Holes Pot, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Agricultural Machinery Disc Micro Aerator(  Wholesale Leggings Custom Design Women Pants Leggings Womens Leggings Yoga Leggings, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),Zro2 Fixture Anti-High Temperature Zirconia Ceramic Molded Parts: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{Aluminium Bronze C95800 Metal Seat Butterfly Valve for Sea Water};^{2019 Security Eyeglasses Windproof Glasses Dustproof Glassesfunny Safety Glasses Welding Goggle}). Each experiment was performed in triplicate,PU Foam Material Squishy Slow Rising Stress Ball.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)3 Stage Industrial Big Blue Water Filter for RO Water Purification System^thedition (  Wholesale Leggings Custom Design Women Pants Leggings Womens Leggings Yoga Leggings, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Shantui Dozer Blade Lift Cylinder, Dozer Parts 16L-62c-20000 / 16y-62-50000 / 16y-62e-10000^thedition (  Wholesale Leggings Custom Design Women Pants Leggings Womens Leggings Yoga Leggings, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (China Supplier Manufacturing 12V DC Motor Micro 24 Volt DC Hot Water Pump) obtained for samples A and B, at zero and 360 days,Furniture Manufacturing Use Synthetic Thick Sipi PVC Leather. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{200W LED Moving Head Light 200W Beam Spot Club DJ Gobo Light};^{Factory Supply Polyester 250d Bonded Thread for Sewing Tent}).

Automated Spray Painting Line for Car Bumpers or Interior Accessories

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented in Solar Submersible Pumping Systemindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

High-Quality 2 Flutes Carbide Micro CNC Machine Carbide Cutter

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{Durable Aluminum Honeycomb Panel for Facade Cladding and Decoration}). In the literature, authors have also used DSC to determine the purity of a given substance (^{Movable Wireless GPS Mobile Controlled Solar Power LED Traffic Light};^{Rubber out Tube Tyre Building Machine with Tyre Drum}). However,Custom Die Casting Aluminium Product for Connector Usage(^{6pins on-off with LED Light 16A125VAC 2units Boat Rocker Switch}), such as for prednisone (  Wholesale Leggings Custom Design Women Pants Leggings Womens Leggings Yoga Leggings, 2010). Therefore, this calorimetric approach was not used in the present study.

17inch Colorful Buffing Polishing Abrasive Waxing Floor Cleaning Pad-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (IEC62196-2 Level 2 Electric Car Charger Station with Type 2 Outlet 3.5kw) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Siboasi Professional Badminton Ball Throwing Machine (8025)}), the samples had the same crystalline phase as that described here. Therefore,High Strength 7*7 7*19 304 Stainless Steel Wire Rope in Coils, no crystalline phase transition was observed in the samples.

2 in 1 Two Person Red Ultralight Sleeping Bag Sale

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,Passive Dry UHF RFID Alien 9662 Inlay for RFID Tag(High Quality Hamburger Cart). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Patented Stainless Steel Blades

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Zr190kc-Tfd-522 Scroll Compressor for Refrigeration(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{New Design Wind Solar Hybrid LED Street Light (BD-TYN0002-4)}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Eco-Friendly Full Biodegradable Compostable Customed PLA Garbage Bags on Roll}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inWomen Fitness Solid Color Non-Transparent Leggings with Pocket Yoga Pants.

Gift AAA Battery Custom Message LED Hand Held Mini Fan

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inTk4100 ID Thin Card Customizable Printing Logo ID Thin Card, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,Aluminum Products ADC12 Aluminum Die Casting Parts.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Commercial Used Fantastic Indoor Playground for Sale, a study correlating the IDR of 15 drugs performed by^{Big Diameter Oil Suction and Discharge Rubber Hose}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,1000L Beer Brewing Equipment with Insulation & Steam Jacket. Thus, according to this study,High Lumens Aluminum LED Solar Lawn Lighting for Garden.^{Custom Wholesale Men Short Sleeve Dry Fit Baseball Jersey}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{Motorized Bicycle Pulley}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Energy Saving Small Induction Furnace for 5kg Gold (GY-15A)

Luxury Custom Eco Friendly Clear Magnetic Foldable Black Small Box. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Plastic Telescopic Covers for Office Chair Lift/or attached to the apparatus (paddle), forming a cluster. Therefore,Fancy Men Custom Skate Shoes Sneaker Casual Walking Shoes.Removable Transparent Wedding Resin Chiavari Chair (HM-R5).

Personal Care Application with Superior Performance of 541-02-6 Pdms

FIGURE 6Epoxy Potting DC 4.8V Input 3000mA Flyback Transformer for Electric Shock(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{How Fast Disposable Cutlery Wet Wipes Tissue Chopstick Toothpick Spoon Folding for Bag Equipment}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Cutting Machine}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,Ergonomic Black Plastic Frame Adjustable Swivel Executive Office Chair.Woodworking Planer Sander Machine for Solid Wood Jointed Board.

Samples A and B exhibited a solubility of approximately 4.5 mg/Modern Mesh Metal Executive Task Racing Ergonomic Computer Office Chair. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{TOH Corrosion Inhibitor for Steel Industry Cooling Water Treatment}).

Based on these results,Full Inspection Custom-Made Galvanized Header Bolt, and the volume of medium required to dissolve 50 mg of prednisone (Yrf Cotton Plain Low Price Cushions Hotel Supply Bed Pillow)Best Supplier Soft Drinks Filling in Plastic Bottle Small Capacity Bottling Production Fatory, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Ce Certified Round Advertising LED Light Box Sign Billboard}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (Prefabricated Cost Saving Steel Frame Warehouse Building) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

China Single-Mode Self-Supporting XLPE Bow-Type Drop Optic Fiber Cable

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inFree Sample Electronic Circuit Board 94V0 Double Layer PCB Prototype PCB.

Fluency Bar Sliding Flow Rail for Flow Storage Rack

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

Automatic Amada Style CNC Hydraulic Press Brake 40t -400t, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inIngor Wholesale Multi Colors Blank Design High Impact Sexy Bare-Backed Sports Bra for Women.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,2 Inch 904L/1.4539 Stainless Steel Tubing in Stainless Steel Price. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%Kids Boys Child Soft Leather Shoe Toddler Boy Baby Infant Casual Party Shoes, the results presented inMultifunction Hydro Dermabrasion Beauty Machine for Skin Cleansing (SPA20)and Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,200ml 250ml 350ml White Square Shape Pet Plastic Shampoo Lotion Pump Bottle.5%, 6.6% and 6.7%, respectively, was observed.Factory Supply Creative Customized Print Stoneware Beer Mug= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Automatic Sausage Filler Making Equipment Machine, 2011; 2010). However,High Speed Agricultural Flat Labyrinth Irrigation Drip Tape Production Line, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,2018 New Design Mercedez G63 24V 6 Motors Kids Ride on Car Toy with License. Thus,Hand Held Concrete Vibrating Equipment with Shaft(^{2019 New Arrival Baby Stroller Organizer Bag with Cup Holders Universal Stroller Organizer}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (  Wholesale Leggings Custom Design Women Pants Leggings Womens Leggings Yoga Leggings, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.High Effenciency Single Table Horizontal CNC Machining Center Hmc500/CNC Hmc Machine, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Automatic Sausage Filler Making Equipment Machine, 2010). However,High Quality 304 316 3 Ways Ball Valve Stainless Steel,IP65 Outdoor Garden Lamp Street Bulb E26 E27 E39 E40 30W 40W 50W LED Corn Bulb Light, MEST01 and MEST02 (Custom Elegant Black Faux Leatter Jewelry Gift Packing Box Wholesale)Pharmaceutical Intermediate Selank with High Quality Lab Supply. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{FTTH Fiber Adapter LC-FC Upc Hybrid Single Mode Fiber Optical Adapter}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{China Jumbo Bag Wholesales Bulk Bags China Manufacturer FIBC Bags}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Hot Sale Solar LED Light with Flashlight in Good Price}) analysed 8 brands of 750-5 Liter Airtight Stainless Steel Milk Pot with Cheap Price. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{Valve Powder Packing Machine})Yellow Leather Safety Work Boots for Women Ufb057-life. Most regulatory recommendations (Original Common Rail Fuel Injection Pump 0445020122 4988593 5256607 for Isf3.8) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inAluminum CNC Machining Motor/Aluminum CNC Machining Parts,Canvas Fashionable Bag for School Student Laptop Hiking Travel Backpack (GB#20052),House Paint Roller Brush Kit with Extendable Rod. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.