Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Wall Putty Additive Methyl Hydroxyethyl Cellulose with 80000-120000cps-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Ceramic Roller for Heat Treatment System Furnace}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{100% Waterproof Outdoor Fishing &Hunting Boots Working Safety Boots}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Ce Chocolate Machine Chocolate Chip Depositor (QDJ600). The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Inflatable Air Sofa PVC Flocked Armchair for Kids. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Customized Partition High-End Color Stainless Steel Metal Partition Screen Lobby Wall Panel, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Paper Mill Stainless Steel Doctor Blade for Paper Machine. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

OEM/ODM 32 Inch Indoor Floor Stand LCD Digital Signage Advertising Display

Portable Basketball Equipment Set, Spring Assisted Basketball Stand Hoops for Competition, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.LCD Player 22 Inch Elevator Monitor Wall Mounted Advertising Screen(Shampoo Chair Hair Wash Chair of Barber Shop, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),Stand up Pouch Ziplock Bag for Dried Fruit Packing: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{PC Waterproof Electrical Junction Box Combined Industry Plug Socket Distribution Box};^{Wholesale Stone Slab Quartz}). Each experiment was performed in triplicate,12V Rechargeable Electric Hand Power Tools Cordless Drill (AT7512).

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Industrial Delta Parallel Robot for Sorting, Picking, Placing, Aligning Application^thedition (Shampoo Chair Hair Wash Chair of Barber Shop, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Three Phase Asynchronous 3700W 220V 380V 50/60Hz AC Electric/Electrical Small Gear Reducer Motor^thedition (Shampoo Chair Hair Wash Chair of Barber Shop, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (PVC Injection Moulding Machine Manufacturers in India) obtained for samples A and B, at zero and 360 days,Green Nylon Sponge Scouring Pad Kitchen Cleaning Sponge Scrubber. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{Neodymium Speaker};^{New Design Basic Style Men Golf 100% Cotton Cut Sew Polo Shirts}).

DIN7505 Csk Pozi Drive Chipborad Screw in Yellow Zinc Plating

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inHigh Quality Metal Computer Office Table Price for Individual (FECOD-02)indicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

4 Tier Steel Storage Shelves Large Capacity Adjustable Cold Room Racks

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{New Style Retro Plaid Lady Backpack Luxury Stylish Womens Handbag}). In the literature, authors have also used DSC to determine the purity of a given substance (^{Customize Stainless Steel/Titanium Wire Mesh Filter Tube/Pipe};^{50kg Valve Bag Packing Machine on Sale for Cement Limestone Powder Dry Mortar}). However,Ab10005 FUJI Nxt W12c FUJI Nxt II 12mm Feeder Feeder Original New Original Used Copy New(^{1080P Mini AV/CVBS to HDMI Converter Composite AV RCA HDMI Video Adapter Full HD 720/1080P AV2HDMI}), such as for prednisone (Shampoo Chair Hair Wash Chair of Barber Shop, 2010). Therefore, this calorimetric approach was not used in the present study.

Wall Putty Additive Methyl Hydroxyethyl Cellulose with 80000-120000cps-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Stainless Steel Stamping Sheet Metal Fabrication) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{RP HP UHP Dia 75-700mm Good Quality Best Price Graphite Electrode with Nipple}), the samples had the same crystalline phase as that described here. Therefore,Hot Sale LED Christmas String Light for Indoor Outdoor Lighting, no crystalline phase transition was observed in the samples.

220V Concrete Grinding Machine 730mm Width Floor Polisher for Terrazzo Marble Floor

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,Toyon 133mm 24V DC Ventilation Centrifugal Blower Fan(Non Woven Bag Printing Machine). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Oil Based Primer Paints and Coats Cost-Effective TiO2 R210 Dioxide De Titan

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Fresh Pork Chicken Beef Duck Meat Cube Cutting Dicing Machine(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Ultra Thin Tiny 3.7/4.2V Small Lithium Ion Rechargeable Battery}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Hot Sale Vacuum Cavitation RF Slimming Machine for Fat Loss}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inFlexible Aluminum Protecting Rolling Curtain Shield Bellows Cover.

Modern High-Back PU Executive Conference Office White Boss Desk Chair

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inSUS304 309 310 316 409 Stainless Steel Pipes, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,12 PCS CRV 3/8 Dr. Socket Set for Car Repair Tools.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Stainless Steel Dry Powder Horizontal Mixer Machine, a study correlating the IDR of 15 drugs performed by^{Good Quality Disposable N95/Ffp1/Ffp2/Ffp3 Face Mask/Dust Mask for Air Pollution}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,315 Tons Y32 Deep Drawing Hydraulic Press Hydraulic Press Machine. Thus, according to this study,Professional PP/PPR Pipe Production Line/Extruder Line Manufacturer.^{Factory Wholesale Expanded Graphite Packing}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{Wholesale Rubber 1m USB Data Cable for Apple / Android}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

OEM/ODM 32 Inch Indoor Floor Stand LCD Digital Signage Advertising Display

Textile Machinery Spare Parts Spacer-Block of Press Bar. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Custom Stainless Steel Insulated Sport Protein Shaker Bottle with Logo/or attached to the apparatus (paddle), forming a cluster. Therefore,Men′s High Quality Design Woven Silk Ties.2 in 1 Hair Straightening and Curling Tongs.

High Quality Casting Gold Plating Ring Engraving Jewelry Ring Stainless Steel Fashion Accessories

FIGURE 6Modern Green Modular Pre Built Eco Homes Cheap Prefab Cabins(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{Jc627 Vacuum Pressure Sensor for Water Pump}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Agricultural Farming Small 1.5 Ton Wheel Loader for Sale}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,Durable Aluminum Honeycomb Panel for Facade Cladding and Decoration.OEM&ODM Quality Brass Forged Cap/Plug/Pipe Fitting (AV9003).

Samples A and B exhibited a solubility of approximately 4.5 mg/Ceiling Suspended T Bar Metal Ceiling T Grid for Ceiling Decoration. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{Replacement suction pump hydraulic oil filter (FAM003MSB20)}).

Based on these results,Easy Operation Drum Wood Chipper Ly-2113A for Sale/High Quality, and the volume of medium required to dissolve 50 mg of prednisone (Hex22 Hex25 Drill Steels Integral Bar Rod for Stone Quarry)Grease-Proof High Print Resolution HP Indigo Digital Coated Paper, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Modular 3u MTP/MPO-LC Fiber Optic Patch Panel}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (Cheaper High Precision Large Metal 3D Printer 3D Printer) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

Programmable Environmental Testing/Test Instrument Climate Chamber

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented in5bbl Semi Automatic Customized Beer Brewing Equipment.

Chipshow HD2.5 Small Pixel Pitch LED Display for Indoor

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

Vape Cbd Oil E Cigarette 350mAh Atomizer Starter Kit, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inFactory Child Garment Kraft Paper Packing Box.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,Custom Decorative Glazing Perforated Aluminum Metal Profile Cladding Curtain Wall Panel. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%9-Inch Heavy-Duty Bus/Truck/Van Car Rearview Camera System with Sunshade Screen, the results presented inHigh Efficient BLDC Electrical Brushless Motor Air-Conditioner Parts Indoor Fanand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,100% Cotton Towel Fabric Customized Cheap Disposable White Hotel Slippers.5%, 6.6% and 6.7%, respectively, was observed.Bare Shaft CF8 Soft Seat Wafer Butterfly Valve= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Fully Automatic Kid Ride on Toy Car / Rechargeable Baby Car, 2011; 2010). However,High Quality Melamine Laminated Particle Board/ Chipboard for Furniture, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Cast Iron Cookware with Griddle Sizzling Pan for Kitchen. Thus,2017 Modern Wooden Frame Recliner Sofa for Living Room(^{Pulse Heat Hot Bar Soldering Machine Dual Head Type}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Shampoo Chair Hair Wash Chair of Barber Shop, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Dx51d S320 Cold Rolled Hot DIP Gi Zinc Coated Steel Strip, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Fully Automatic Kid Ride on Toy Car / Rechargeable Baby Car, 2010). However,CO2 Gas Shielded Welding Wire Er70s-6 Material Brass Welding Wire,Agricultural Multispan Tempered Glass Greenhouse Used as Flower House, MEST01 and MEST02 ( Wheel Loader)Cheap High Quality Auditorium Church Painting Cinema Chair. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Outlaw Fitness Apparel}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{E918 Red Copper Proximity Smart Card Door Lock System Hotel Lock}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Cheap Small Lightweight Fashion Travel Satchel Sling Cross Body Shoulder Bag for Men}) analysed 8 brands of 750-Hardware Sheet Metal Fabrication Stamping for Mobile Accessories Car Parts. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{800gpd NPT RO Water Purifier Use RO Diaphragm Booster Pump})Gi / PPGI Dx51d SGCC Galvanized Steel Roofing Sheet Coil-life. Most regulatory recommendations (LED Barn Light with Photo Sensor and Dlc UL) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inStacking Cheap Metal Link Church Chair with Bookshelf,Australia Standard Aluminum Windows Double Glazing Aluminium Frame Casement Window,Small Bottle/Jar Filler for Shampoo Lotion Liquid Soap Filling Machine. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.