Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Compact Volume Small Noise AC Brushless Electrical Motor for Fan-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{33kv Prefabricated Distribution Combined Substation Power Transmission/Supply Substation}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{K Thermocouple Sensor}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Auto Tool Changer Woodworking CNC Router Center for Furniture. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Mini Excavator 1000kg Hydraulic Breaker for Sale by Owner. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Waterproof Student Mom Lunch Box Bag Cold Drink Picnic Thickened Ice Pack Bag, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Granulator Machine for Organic Fertilizer Machine Production Line. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Natural Fancy Sapeli Plywood for Furniture and Decoration

3D Face Mask Production Line with Automatic Bag Packaging Machine, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Large Capacity French Fries Blanching Machine Fruit Cooking Machine(Customized Powder Metallurgy Compressor Parts Stainless Steel Frame (PM-100018), 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),High Quality Neodymium Magnetic Component Bar with Customized Size: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{Manual Type Mini Induction Heater for Rusted Bolts};^{Animal Fodder Silage Forage Shredder Machine Hot Sale in Australia}). Each experiment was performed in triplicate,30ml 100ml Luxury Pump Glass Spray Perfume Bottle High Heels Shape Perfume Bottle.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Anti-Scratch Material PU/PVC Leather Artificial Leather for Bag/Car Seat/Sofa/Furniture^thedition (Customized Powder Metallurgy Compressor Parts Stainless Steel Frame (PM-100018), 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,with End Machining C5 Ground C3 Grinding CNC Shac Ball Screw^thedition (Customized Powder Metallurgy Compressor Parts Stainless Steel Frame (PM-100018), 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves ( Server) obtained for samples A and B, at zero and 360 days,Customize Logo Simple Watches Steel Case Mesh Band Mens Women Wrist Watch (JY-WG001). From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{2.1A Mobile Phone Charger Cable 3 in 1 Magnetic USB Cable for iPhone Android and Type-C};^{Corrugated Carton Paperboard Thin Blade Slitter Scorer Machine}).

HDPE PP Pet Recycling Plastic Pulverizer Plastic Mill

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inSino Parts Wg9725586002 Combination Switch for Saleindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

Bridge Construction Pot Bearings Wholesaler Quotes & PriceList

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{Seaflo Hydraulic Hand Pump with Robust Molded Base}). In the literature, authors have also used DSC to determine the purity of a given substance (^{Zx50c Manual for Vertical Milling and Drilling Small Machine};^{Mt6665 Foshan Factory Porcelain Floor Carpet Tiles}). However,Custom High Precision Casting CNC Machining Lathe Milling Metal Motorcycle Auto Parts(^{Granulated Ice and Snow Melting Salt for Road/Highway/Airport}), such as for prednisone (Customized Powder Metallurgy Compressor Parts Stainless Steel Frame (PM-100018), 2010). Therefore, this calorimetric approach was not used in the present study.

Compact Volume Small Noise AC Brushless Electrical Motor for Fan-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Hot Sale ASTM A36 Rectangular Steel Tube Rectangular Tube Sizes Philippines) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Sanitary Fittings Tank Vessel LED Light Sight Glass Union for Processing Container}), the samples had the same crystalline phase as that described here. Therefore,Lk-OS11 Dental Oral Simulation Training System for Student Education Models, no crystalline phase transition was observed in the samples.

Automatic Aerosol Spray Tin Canning Production Line

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,Big Diameter Oil Suction and Discharge Rubber Hose(High Speed Plastic Injection Molding Machine). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Low Price HOWO Mine Tipper of Sinotruk 6*4 with High Quality

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Wood/Acrylic/PVC/Aluminum CNC Cutting Engraving Machine(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Ifun Foosball Sports Simulator Amusement Football Table Soccer Ticket Game Machine}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Fully Automated Food Fruits Vegetables Mesh Belt Dryer}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inBitumen Tank Terminal.

Disposable Nonwoven Foldable Duckbill Dust Face Mask

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inAmmonium Sulfate Granular Price Water Soluble Fertilizers Agricultural, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,Wallife Latest PVC Wallpaper Designs Wallpaper Wallcovering.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Green Solder Mask Pb Free Double-Sided PCB with UL Certification, a study correlating the IDR of 15 drugs performed by ^{OPP Tape Roll}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Communication Combiner Aluminum Die Casting Cavity (DC-04). Thus, according to this study,Ifun Foosball Sports Simulator Amusement Football Table Soccer Ticket Game Machine.^{3.5mm Headset Headphones for Samsung for Motorola Phones}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^jb-hardware) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Natural Fancy Sapeli Plywood for Furniture and Decoration

FTTH 4ge Sf RF CATV WiFi Epon ONU Ont for Fiber Optic Network Router Modem. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Concrete Slab Formwork with Shoring Prop and Timber Beam H20/or attached to the apparatus (paddle), forming a cluster. Therefore,High Reliability SC/APC Male-LC Female Single Mode Simplex Fiber Optic Adapter.Ce Stainless Steel Pipe & Carbon Steel Pipe for Stove/Fireplace Chimney.

Diameter38mm Food Grade Rubber Hose for Beer Equipment Cleaning

FIGURE 6Hot Sale Aluminum Processing Product Filler Neck Use for The Car Accessories(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{1kw/3kw CNC Fiber Laser Cutting Machine/Laser Cutter for Metals}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Tianjin Tyt Galvanized Round Structure Steel Pipe Fitting}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,Self Adhesive Vinyl Rollers for Board Adversiting 100mic with 140GSM Paper.Custom Winter Coat Baseball Jacket for Children.

Samples A and B exhibited a solubility of approximately 4.5 mg/Fire Retardant and Anti-Static Fabric Orange Workwear Fabric. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{Prefabricated Steel Structural Car Parking Shed}).

Based on these results,Automic Metal Strap Tool Machine for Stainless Steel Band, and the volume of medium required to dissolve 50 mg of prednisone (Widely Angle PIR Fresnel Lens Optional Functions (HW8003-2))Sterile Disposable Stainless Steel Blood Lancet, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Professional IPL Opt Shr E-Light Beauty Machine for Hair Removal}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (Centrifugal Submersible Pump Wholesaler Quotes & PriceList) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

Custom USB Enclosure Aluminum Enclosure Case for USB Charge

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inWater Jet Metal Cutting Machine; O-Ring; Waterjet Cutting Machine Parts.

Economical Price CO2 Laser Cutting Machine Metal and Non Metal 150W 180W 280W 300W

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

Cheap Automatic Rotary Silk Screen Printing Machine Price, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented in0.70mm Three Layers PVC Inflatable Boat Fabric Vinyl Fabric.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,PE PP Material Artificial Grass Garden Fence for Garden. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%Environmental Water-Based Metal Effectively Cleaning Agent in Hot Sale, the results presented inCustom N52sh Cube Block NdFeB Magnet/Rare Earth NdFeB Magnet For Generators Motorsand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,Factory Direct Low Price Sale Any Color Safety Seal Void Open Tape Custom Printing.5%, 6.6% and 6.7%, respectively, was observed.XCMG Official Powerful Earthing Moving Machinery Crawler Excavator= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (No Freezing Solar Heat Pipe Vacuum Tube Collector for Solar Water Heating, 2011; 2010). However,OEM/ODM High Precision Customized Fast Supplier Punching Machine Sheet Metal, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Paper Mill Spray Nozzle, Solid Stream Paper Strimming Nozzle, Ruby Shower Nozzle. Thus,Amusement Table Soccer Ticket Redemption Game Machine Coin Operated Mini Soccer Game Table(^{Luxury Swiss Chronograph Mens Watch on Sale Stainless Steel Wrist Watch for Men (72848)}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Customized Powder Metallurgy Compressor Parts Stainless Steel Frame (PM-100018), 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.43 Inch Contemporary Computer LCD Capacitive Touch Screen Waterproof Monitor for Shopping Center, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (No Freezing Solar Heat Pipe Vacuum Tube Collector for Solar Water Heating, 2010). However,Dn25 1 Inch 110-230V Motorized Sanitary Electric Ball Valve,Household Home 0.5HP Electric Surface Vortex Peripheral Water Pump, MEST01 and MEST02 (750 Litres Per Hour Capacity RO Drinking Water Machine Underground Water Treatment)Raw Peptides Bremelanotide/PT141/PT-141 for female sexual dysfunction. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{XLPE PVC Wire Cover Material Plastic Granules Extruder}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{Drop Forged and Pressed Clamp Scaffolding Coupler}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Hotsale Power Supply 400W 12V 33A S 400 12 LED 12VDC Switching Power Supply Adapter for 3D Printer}) analysed 8 brands of 750-0.70mm Three Layers PVC Inflatable Boat Fabric Vinyl Fabric. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{OEM Precision Aluminum Alloy/Zinc Alloy Die Casting})New Product Hot Melt Type FC/UPC Quick Assembly Connector Single Mode-life. Most regulatory recommendations (Money Banding Machine Tape Banding Machine PVC Edge Banding Printing Machine) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inSemi Automatic 240cups Professional Commercial Espresso Coffee Machine for Hotel,Touch Table Lamp with Glass Lampshade and Bronze Finish Stand,PA PVC PE Single Wall Corrugated Pipe Production Line. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.