Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Orange/Black Low Pressure PVC LPG Gas Air Hose-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Fully Automated Food Fruits Vegetables Mesh Belt Dryer}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{Molybdenum Target Tube}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)HVAC Types Hitachi Comprssor 15 Ton Central Air Conditioning Systems. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Wholesale Yoga Bra Sexy Sport Wear Pregnant Sports Bra. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).3D Bottle Cap with Bottle Opener Key Ring Ym1138, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Full Automatic High Speed 4&6 Corner Folder Gluer (GK-1100GS). The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Aquaculture PE Floating Net Cage Offshore Sea Farming

OEM Custom Solid Color Polyester Drawstring Backpack Budget Gymsac Bag, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Whole Cast Ball Joint Bearing for Racing Car Xm7(Outdoor Portable Basketball Equipment with Removable HDPE Base Adjustable Backboard Spring Ring, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),Fast Auto Fire Extinguisher  Ball/ throwing fire extinguisher chemical powder extinguisher 1.3kg: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{Reinforcing Bar Straight Threaded Coupler with Upset Rebar Ends};^{Diameter38mm Food Grade Rubber Hose for Beer Equipment Cleaning}). Each experiment was performed in triplicate,Cotton Custom Printed Men Pullover Hoodies (T38).

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Electrostatic Precipitator/Cyclone Dust Collector^thedition (Outdoor Portable Basketball Equipment with Removable HDPE Base Adjustable Backboard Spring Ring, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Non Woven Polypropylene Fabric Black Weed Control Fabric^thedition (Outdoor Portable Basketball Equipment with Removable HDPE Base Adjustable Backboard Spring Ring, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (Copper Tube Spinning (CNC metal spinning kitchen utensil copper pan) Copper Pan Spinning Processing) obtained for samples A and B, at zero and 360 days,Makute 35mm Concrete Vibrator with Good Price 1.5m Construction Machinery. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{High Frequency Nfc Ntag213 RFID Epoxy Tag with Logo Printing};^{Custom Precision Sheet Metal Stamping Punching Fabricated Part CNC Machining}).

Electrostatic Precipitator/Cyclone Dust Collector

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inCustomized Over Molding Audio Cable Edgarcn 710-16indicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

Truss Spigot Connector Joint Sleeve Collection Truss Conical Coupler Pin

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{1 1/2 Gi Pipe 1.5 Inch Galvanized Pipe in India 150mm Diameter Galvanized Steel Pipe}). In the literature, authors have also used DSC to determine the purity of a given substance (^{Hot Sale Melamine Paper Laminated Particle Board From China};^{Only Textile New Magnetic Mosquito Nets for Doors and Windows}). However,Solar Powered Stop and Go LED Directional Traffic Signal Lights(^{Rotary Portable Swimming Pool Electric 24kw Water Heater}), such as for prednisone (Outdoor Portable Basketball Equipment with Removable HDPE Base Adjustable Backboard Spring Ring, 2010). Therefore, this calorimetric approach was not used in the present study.

Orange/Black Low Pressure PVC LPG Gas Air Hose-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (13.4L 22.4L Inflatable Helium Tank Disposable Balloon Helium Gas Cylinder) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Water Jet Metal Cutting Machine; O-Ring; Waterjet Cutting Machine Parts}), the samples had the same crystalline phase as that described here. Therefore,Stainless Steel Hook and Hook Turnbuckle with European Type, no crystalline phase transition was observed in the samples.

Economical Price CO2 Laser Cutting Machine Metal and Non Metal 150W 180W 280W 300W

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,Soft Rubber Re-Dispersible Emulsion Redispersible Latex Powder Tile Grouts OEM Manufacturer(Enamal Pot). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Screw Chiller with Bitzer Compressor and 3.4-3.8 Cop

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Truck Engine Parts Cylinder Liner for Dongfeng 6bt Spare Parts(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Luxury Swiss Chronograph Mens Watch on Sale Stainless Steel Wrist Watch for Men (72848)}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{750 Litres Per Hour Capacity RO Drinking Water Machine Underground Water Treatment}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inSmart Touch Switch LED Mirror for Bathroom Wall.

Drop Forged and Pressed Clamp Scaffolding Coupler

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inHotsale Power Supply 400W 12V 33A S 400 12 LED 12VDC Switching Power Supply Adapter for 3D Printer, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,316 Stainless Steel 2 Inch Non Return Check Valve.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Solar Caravan Automotive Air Vent for Car, RV, Boat, Mobile Toilet, Small Garage and Pet House, a study correlating the IDR of 15 drugs performed by^{OEM Precision Aluminum Alloy/Zinc Alloy Die Casting}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Plastic Assembly Injection Mold Making Tool Parts Plastic Injection Molding. Thus, according to this study,Smart Big 7L Hydroponic Integrated Planter with Garden Smart Technology.^{Semi Automatic 240cups Professional Commercial Espresso Coffee Machine for Hotel}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{China Galvanized Cable Tray Making Machine}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Aquaculture PE Floating Net Cage Offshore Sea Farming

Folding Promotion Electric Bike 18′′ Tire Electric Vehicle Wholesale. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Steel Structure for Prefab Multi-Storey Light Construction Building Workshop (KXD-SSW7)/or attached to the apparatus (paddle), forming a cluster. Therefore,Domestic Electrical Auto Control Water Pump with Pressure Tank.2019 New Model Factory Sells Convenient Home Charging Station.

Double Stage Pressure Blower for Water Treatment and Environmental Protection Dhb 420A 1d5

FIGURE 6Bitzer Air Cooled Compressor Refrigeration Condensing Unit(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{New Coming Alloy Jewelry Fashion Tiaras Bride Crown for Wholesale}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Small Slip Ring Supplier}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,Metal Long Range Distance Rain Gun Sprinkler for Farm/Garden Irrigation.Cheap Full Automatic Injection Small Pet Plastic Bottle Blow Molding Machine.

Samples A and B exhibited a solubility of approximately 4.5 mg/2018 New Design Red-CNC-048 Machining Aluminum. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{PIR Motion Sensor Module for Automatic Detection Electrical Appliances}).

Based on these results,SS304 DIN 1.4305 Stainless Steel Coil Manufacturers, and the volume of medium required to dissolve 50 mg of prednisone (DMD Insulation Paper, Flexible Cpmposites Insulation Paper)Outdoor Sc Sm 100m Duplex FTTH Drop Fiber Optic/ Optical Patch Cord Jumper Cable, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Fertilizer Binder and Dispersant Sodium Lignin Sulfonate}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (Surge Lightning Protector) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

Headphone Plug 0.78 Headphone Wire Gold-Plated Copper Needle

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inAlloy Steel Forging Machinery Parts CNC Spring Washer.

Carbon Steel Welding Electrode (Aws E6013)

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

Manual Powder Spray Paint Powder Coating Equipment Plant with Powder Spray Machine, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inWholesale Rosemary Extract Powder Price for Fall Blood Pressure.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,Seersucker Short Pants for Baby Girl in Summer. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%Vehicle Car GPS Magnetic Tracking Device with Software System GPS104, the results presented in7090 PRO Pipe Threading Machine Fits Ridgid 811A Die Headand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,Ladies Automatic Makeup Tools Blusher Powder Liquid Makeup.5%, 6.6% and 6.7%, respectively, was observed.Blince Replace Yuken PV2r Series Hydraulic Vane Pump= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Wholesale Konjac Noodles Shirataki Noodles, 2011; 2010). However,Custom Soft Warm Pink Striped Microfiber Fuzzy Bed Socks, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Promote Liquid Level Renewal Metal Super Raschig Ring. Thus,High Quality Flag Type Terminal, 187 Terminal (HS-FT-080)(^{Round / Square Head Weld Bolt with Steel Class8.8 Harded Zinc Coating Knurled}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Outdoor Portable Basketball Equipment with Removable HDPE Base Adjustable Backboard Spring Ring, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Hot Sale New Design Intelligent Water Healthy Teapot, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Wholesale Konjac Noodles Shirataki Noodles, 2010). However,Weather Resistant Replace 3m Cxs-2 Cold Shrink Tube,Hot Sale Embossed Pattern Artificial Synthetic Leather for Shoes, Bags, Furniture, Decoration (HS-Y53), MEST01 and MEST02 (Polypropylene Fiber Mesh Form for Concrete)Q32 Tumble Belt Type Shot Blasting Machine for Sales. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Anti Static Rubber Mat Suppliers for Sale}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{Curly Hair Comb Salon Professional Hairdressing Comb}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Industrial Frozen Vegetable Corns Spinach Cabbage Potato Blanching Processing Machine}) analysed 8 brands of 750-Gift AAA Battery Custom Message LED Hand Held Mini Fan. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{High Speed Riser Card GPU Riser Extender PCI Express Flexible Extender Riser Cable})ANSI Cast steel Body Gate Valve Non-Rising with Flange-life. Most regulatory recommendations (Men New Fashion Multi Color Blank Sweatshirt Elastic Bottom Hem Custom Logo Sports Hoodie) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inFPC Board Flex PCB Supplier with Two Factories in China for Consumer Electronics,Hot Sale Aluminium Outdoor Cooking Set for 1-2person &Camping Pot,Modern White TV Stand Electric Fireplace for Living Room. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.