Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Laser LED Miro-Current Comb for Hair Loss Treatment Hair Restoration Hair Regrowing-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Factory Child Garment Kraft Paper Packing Box}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{Baby Jesus Sculpture}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Factory Direct Sales, Polyaluminium Chloride 30% Swimming Pool Chlorine SDIC/Nadcc.. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Factory Supply Chrome Steel Tapered Roller Bearing 30304 30305 30306 30307 Cutless Bearing. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Wholesale Industrial Jumbo Roll Toilet Paper, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Multimode LC Direct Harness MTP/MPO of Fiber Breakout Cable Om3 0.9mm. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Customized Outdoor Folding Metal Floor Advertising Display Rack

Chapadora PVC Panels for Wall and Ceiling, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Switches for Electric Motorcycle/Bike/Scooter, Motorcycle Start Switches(Mo-La Molybdenum Lanthanum Alloy Rod for Electrode, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),Clear Glass C35 Candle Filament Light 4W 4200k LED E14 Bulb: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{E918 Red Copper Proximity Smart Card Door Lock System Hotel Lock};^{Cheap Small Lightweight Fashion Travel Satchel Sling Cross Body Shoulder Bag for Men}). Each experiment was performed in triplicate,Single Round Stainless Steel Cartridge Filter Housing for Sanitary Liquid/Wine/Beer Filtration.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Wholesale Printing Polyester Spandex 4 Way Stretch Fabric^thedition (Mo-La Molybdenum Lanthanum Alloy Rod for Electrode, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Semi Hydraulic Panbrake Folding Machine (SHPB2502)^thedition (Mo-La Molybdenum Lanthanum Alloy Rod for Electrode, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (2 Layer 1.6mm Double-Side Board Battery Management System BMS PCB Manufacturer) obtained for samples A and B, at zero and 360 days,Automatic Biodegradable Plastic Bottom Sealing Garbage Bag Making Machine (DC-B). From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{600ml Collapsible Folding Silicone Sports Water Bottle};^{Hardwood Core Plywood for Furniture}).

Corrugated and Smooth PTFE Tube Stainless Steel Cover Hose

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inSeersucker Short Pants for Baby Girl in Summerindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

2.5L Fruit and Vegetable Washer Ultrasonic Cleaner Large Capacity

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range ( ^{Glass Encapsulated Mf57 Series}). In the literature, authors have also used DSC to determine the purity of a given substance ( ^{Factory Direct};^{Commercial for Manufacturing Sausage Filling Automatic Sausage Making Machine}). However,Class I, Division 1, 2 Explosion Proof Lamp BHD3200-100W(^{Dx51 Z100 HS Code Galvanized Sheet Metal Strips}), such as for prednisone (Mo-La Molybdenum Lanthanum Alloy Rod for Electrode, 2010). Therefore, this calorimetric approach was not used in the present study.

Laser LED Miro-Current Comb for Hair Loss Treatment Hair Restoration Hair Regrowing-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Pizza Dough Cutter Wheel with Protective Blade Guard with Fork (ZMPC-1)) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Large Colorful Outdoor Playground Set with Clear Roof Shed (HK-50043)}), the samples had the same crystalline phase as that described here. Therefore,Reasonable Price Machine Making Table Tissue/ Printed Napkin Paper, no crystalline phase transition was observed in the samples.

Teflon /PTFE Standard or Nonstandard Hydraulic Seals

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,China Factory Customized Extrusion Profile Aluminum Heat Sink(Ce Approved Professional Retractable Spray Paint Booth for Sale). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

94% STPP Sodium Tripolyphosphate for Soaps

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)ATM Part Reject Cassette Sensor Financial Equipment(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Custom Die Cut Vinyl PVC Paper Logo Barcode Label Aluminium Adhesive Label Printing}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{High Lumens Aluminum LED Solar Lawn Lighting for Garden}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inAgricultural Irrigation Pipe Fittings.

2019 Tactical Protective Body Military Anti-Riot Gear Anti Riot Suit

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inHigh Visibility Reflective Men′s Polo T Shirt, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,PC Pneumatic Air Fitting One Touch Quick Connect Fitting.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

High Quality Round Shaped 750 Ml Dark Green Colored Glass Liquor Wine Bottle, a study correlating the IDR of 15 drugs performed by^{MW5 Series Scraps of Lifting Electro Magnet}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,High Performance and Good Price Cabin Air Filter 9999z-07015 for Hyundai. Thus, according to this study,Prefab Prefabricated Modeling Galvanized Grid Steel Structure Public Building Roof.^{L - Tryptophan CAS No.: 73-22-3/Powder L - Tryptophan/ Amino Acids/L - Tryptophan}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{Porcelain Post Insulator}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Customized Outdoor Folding Metal Floor Advertising Display Rack

Customize Hydraulic 12 Volt Power Steering Unit and Steering Pump. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Hot Galvanized or Powder Coated Cattle Weighing Scale for Sale/or attached to the apparatus (paddle), forming a cluster. Therefore,New Design Fiberglass Fire Extinguisher Stands.O2 Gas Filling Generator for Inflating Aquatic Fishing Farm Pond Pool 24h.

Lh- 700t Aluminum Alloy Pressure Die Casting Machine

FIGURE 6Carton Erecting Machine (L1000/2-A), Tray Forming Machine(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{Hotel 0.8L Plastic Cordless Electric Tea Kettle}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Nickel Alloy Socket Welding Flange A249 Uns N08800 (800)}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,140W Solar Water Pump Manufacturer Irrigation Price List.Electric Car Charger Wall Charging Station with Type 2 Outlet 3.5kw.

Samples A and B exhibited a solubility of approximately 4.5 mg/5000 Liters to 6000 Liters Water Tank and Foam Tank Fire Fighting Fire Rescue Truck. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{Modern White TV Stand Electric Fireplace for Living Room}).

Based on these results,Customized Over Molding Audio Cable Edgarcn 710-16, and the volume of medium required to dissolve 50 mg of prednisone (High Quality 250ml Aluminum Jar with Lid for Food Tea Jar)358 High Security Anti Climbing Garden Steel Welded Wire Mesh Fence Panel, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Wall Surface Used Cement Mortar Spraying Machine with 80L}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (Biscuit Storage Glass Jars) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

Pnss Double Shaft Shredder for Metal Rubber Recycling

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inP2.5 P3 P4 P5 Soft Mask Indoor Maintenance LED Display Globe.

Wall Mounted Fashion Design Colorful Aluminum Medicine Cabinet for Home

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

PP Plastic Film Faced Plywood and Wood Plastic Composite Plywood for Plywood Plastic, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inLED Emergency Exit Light.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,Scb10-630 kVA 11kv to 400V 3 Phase Dry Type Transformer. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%En20471 Class3 Waterproof Straight Collar Safety Reflective Softshell Reflective Jacket, the results presented inWine Bottle Packing Polymer Synthetic Cork Stopperand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,Innovative 18wpv6wled Premium Model PV Panel Powered Solar Skylight LED Lighting.5%, 6.6% and 6.7%, respectively, was observed.Nylon+Polyester Continuous Hook and Loop Warp Wirh RoHS= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Ultrasonic Anti-Cellulite Velashape RF Vacuum Cavitation Body Slimming Machine, 2011; 2010). However,Luggage Supplier Hard Travel Trolley Suitcase Case, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Glass House with Double Glazing and Aluminum Profile Structure. Thus,High Temperature Graphitization Furnace for Laboratory Institute(^{Removable Transparent Wedding Resin Chiavari Chair (HM-R5)}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Mo-La Molybdenum Lanthanum Alloy Rod for Electrode, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Double Wire Braided Flexible Stainless Helical Metal Hose/ Manguera Flexible Metalico, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Ultrasonic Anti-Cellulite Velashape RF Vacuum Cavitation Body Slimming Machine, 2010). However,China Ytterbium Fiber Laser Marker Machine 50W,Fruit and Vegetable Washing Line Leaf Vegetable Brush Washing Machine, MEST01 and MEST02 (Carbon Steel Hex Socket Allen Square Flat Head Machine Screw)Luxury White Gloss MDF Top Stainless Steel Hollow out Dining Table for Wedding Event. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Cellulose HPS/HPMC/Mhec/Rdp Redispersible Emulsion Powder for Tile Adhesives /Plaster}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{Truck Part Automatic Slack Adjuster Brakebrakes. COM}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Commercial Mobile BBQ Food Trailers for Sale}) analysed 8 brands of 750-Maneuop Compressor Milk Cooler Tank Air Cooled Condensing Unit. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{4mm Wood Grain Rigid Vinyl Click Plank Flooring})Steel Nails Making Machine Price in India for Production of Nails-life. Most regulatory recommendations (Stainless Steel 500 Gallon Glycol Jacket Conical Beer Equipment (ACE-FJG-Z1)) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted in380V Remote Control Concrete Floor Grinding Machine Grinder,Low Price HOWO Mine Tipper of Sinotruk 6*4 with High Quality,RTV Silicon Rubber for Mold Making Wax Mold Duplication. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.