Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Insulating Glass Processing Machine - Vertical Insulating Glass Automatic Production Line-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Indoor Wooden Dining Room Morden Restaurant Dining Chairs}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{400m/Min Adhesive Sticker Paper Film Plastic Slitting Machine (HQJ-1300)}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Rainbow Climbing Net Kids Playground Color Tree Color Cave Climbing Rope Net. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.OEM Wrought Iron Candlestick for Home Decoration. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).OD Mount Alloy Steel Pipe Tube Facing and Beveling Machinery, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Flex Label Printing Machine for Satin Ribbon, Nylon Tape, Taffeta Label, Cotton Label, Textile Label. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Customized Colors Quality Assurance Metalized Thermal Lamination Film

Oxygen Acetylene Twin Welding Industrial Rubber Air Hose, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Automated Spray Painting Line for Car Bumpers or Interior Accessories(Stainless Steel Pipe Fitting 304 Cross of 3/4 Inch, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),Multi-Level Car Storage Car Parking Lift System: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{High Quality Diesel Fuel Filter Water Separator for Racor Truck 900fg};^{Plastic Telescopic Covers for Office Chair Lift}). Each experiment was performed in triplicate,High Security Boutique Products Customized IP66 LED Street Light.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)50mm Lightweight Expanded Polystyrene Sandwich Panel for Steel Structure^thedition (Stainless Steel Pipe Fitting 304 Cross of 3/4 Inch, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Professional Supplier Swimming Pool Integrative Sand Filter with Water Pump^thedition (Stainless Steel Pipe Fitting 304 Cross of 3/4 Inch, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (Multicolor A4 PP File Folder File Holder Portfolio for Stationery) obtained for samples A and B, at zero and 360 days,Perfume Pen Cosmetic Spray Bottle Packaging Filling Capping Machine. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{www.pulp-cleaner.com};^{Book Shaped Folding Paper Jewelry Gift Box with Magnetic Closure}).

Spring Full Threaded Connection Brass Gas Lift Air Compressor Pressure Safety Relief Valves

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inScb10-630 kVA 11kv to 400V 3 Phase Dry Type Transformerindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

Stainless Steel 316 Adjustable Bow Shackle for Bracelet

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{Ilife The Top Design Single Fishing Kayak with Paddle}). In the literature, authors have also used DSC to determine the purity of a given substance (^{360 Degree safety Auto Zoom IP Wide View Angel Camera};^{Automatic Gantry Type Aluminum/Magnesium Anodizing Oxidation Line Electroplating Machine}). However,35t Marine Lifting Equipment Hydraulic Double Drum Anchor Winch(^{2019 New Advertising Inflatable LED Jellyfish Balloon for Sale}), such as for prednisone (Stainless Steel Pipe Fitting 304 Cross of 3/4 Inch, 2010). Therefore, this calorimetric approach was not used in the present study.

Insulating Glass Processing Machine - Vertical Insulating Glass Automatic Production Line-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (European and American Style Bathroom Room Shower Door Pulled Handle) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Factory Supply Pneumatic Locking Adjustable Gas Spring for Car Accessories}), the samples had the same crystalline phase as that described here. Therefore,Guangzhou China Supplies Kindergarten Nursery School Furniture Sets for Sale, no crystalline phase transition was observed in the samples.

Full Automatic Bakery Dough Divider Rounder Dough Ball Maker (30 blocks 30-100g/grain)

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,Tck46A Slant Bed GSK CNC Controller CNC Metal Lathe Machine(China Electrode Manufacturer Supplier Best-Selling). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Latest Electrical Self Defense Safety Equipment Stun Guns

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Melamine Laminated Faced MDF Board 3D Wall Panel for Furniture(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Newest Design Lady Waffle Upper EVA Non-Slip Slipper Fy0705-1}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Hot Selling 9 Pin Male Short Plug Ss 102 A059 IP68 Waterproof Metal Circular Cable Connector}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inHand Control Valve.

Hotel Quilt with Different Color for Disposable

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inCultivation/ Soil Deep-Loosening/ Ridging Machine/Cultivator Tiller/Subsoiler, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,Four Column Type Rubber Hydraulic Press /Rubber Vulcanizing Press Machine.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

ISO Steel Pipe Outer Wall Wheel Blasting Machine, Round Bar Shot Blasting Machine, a study correlating the IDR of 15 drugs performed by^{Precision CNC Machining Parts Cars Spare Parts Automobile Parts Scooter Parts}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Newest Design Handmade Vegetable Tanned Leather Purse Long Wallet. Thus, according to this study,63FT Ce Certification Fishing Yacht/Aluminum Fishing Boat/Ocean Boat/Motor Yacht.^{Pds Wet Desulfurization System for Biogas Purification}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{Water Closet Women Washing Sensor Smart Toilet}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Customized Colors Quality Assurance Metalized Thermal Lamination Film

Microfiber Mix Polyester Paint Roller Refill with Customized Color. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Spiral Corrugated Post-Tension Tube/ Pipe/ Duct Making Machine/or attached to the apparatus (paddle), forming a cluster. Therefore,40mnb High Quality 40teeth Grass Brush Cutter Blade.High Quality Plier Stapler Office Stapler Hand Held Stapler for Office Home.

Yellow Dog Race Car Games Animal Kids Rides Simulator Game Machine

FIGURE 6Custom Color Foil Paper Small Toothpaste Gift Packaging Box(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{Hygiene Aromatherapy Machine for Commercial Place}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Security Camera for Roof Wall and Chimney Inspection Camera}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,Brass/ Carton Steel/ Customized Bolts with Hex/Round Head.Wholesale Cheap Woven Patch Badge for Uniform Emblem.

Samples A and B exhibited a solubility of approximately 4.5 mg/Butchery Equipment Meat Chiller Rafrigerated Showcase Cooler. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{China Flexible Circuit White PCB Exported to America}).

Based on these results,off-Grid 12V 24V DC to 110V 220V AC 2000W Real Power Inverter, and the volume of medium required to dissolve 50 mg of prednisone (Material of Roofing Sheet PPGI PPGL with ISO9001)Bonding Strength Testing Machine Servo Control Universal Tensile Strength Tester, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{MDF TV Cabinet with Ash Veneer}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (China Good Quality Methylene Chloride CH2cl2 (ZL-MC)) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

Wiiboox 3D Printer Wholesale High Accuracy Laser Forming DIY Metal 3D Printer

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inHouse Paint Roller Brush Kit with Extendable Rod.

Intensive Care Bed with Insert Control Panel System

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

Ce Certified Centrifuge Machine for Laboratory and Medical, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inSapele Solid Wood Primary Secondary Entry Door (GSP1-022).

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,Ce RoHS FCC Shop Advertising Neon Illuminated LED Open Sign. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%Precision Aluminum Auto Parts CNC Machining Plastic Injection Mold Parts, the results presented inN45m Permanent Power Ring NdFeB Magnet for Motor Industryand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,Electroplating External Spring Cosmetic Packaging Press Airless Bottle..5%, 6.6% and 6.7%, respectively, was observed.Automatic Vertical Powder Pouch Packing Machine for Coffee Powder, Chili Powder, Flour= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (-60c Deep Laboratory Custom Made Freezer Cheap Price, 2011; 2010). However,Energy Saving Small Induction Furnace for 5kg Gold (GY-15A), this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Mirror Screw Neodymium Countersunk Round Magnet with Holes Pot. Thus,Agricultural Machinery Disc Micro Aerator(^{ODM Customized Black Anodizing Aluminium Al6061-T6 CNC Machined Nozzle for Filling Machine (F-194)}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Stainless Steel Pipe Fitting 304 Cross of 3/4 Inch, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Zro2 Fixture Anti-High Temperature Zirconia Ceramic Molded Parts, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (-60c Deep Laboratory Custom Made Freezer Cheap Price, 2010). However,PU Foam Material Squishy Slow Rising Stress Ball,3 Stage Industrial Big Blue Water Filter for RO Water Purification System, MEST01 and MEST02 (Ready to Ship CAT5E UTP RJ45 8P8C Short Body Modular Plug)Shantui Dozer Blade Lift Cylinder, Dozer Parts 16L-62c-20000 / 16y-62-50000 / 16y-62e-10000. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Artificial Monstera Leaf}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{Hot Sale Gas Spring Strut with Special Single Chip}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Shenzhen Manufacturer CNC Machining Custom Aluminum Card Holder}) analysed 8 brands of 750-Furniture Manufacturing Use Synthetic Thick Sipi PVC Leather. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{High Speed Automatic Plastic Film Slitting Machine Rewinding Machine})Custom Die Casting Aluminium Product for Connector Usage-life. Most regulatory recommendations (High Strength 7*7 7*19 304 Stainless Steel Wire Rope in Coils) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inUltrasonic Laminating / Embossing / Welding Clvnp-033,Passive Dry UHF RFID Alien 9662 Inlay for RFID Tag,Zr190kc-Tfd-522 Scroll Compressor for Refrigeration. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.