Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Laser LED Miro-Current Comb for Hair Loss Treatment Hair Restoration Hair Regrowing-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Indoor Wall Mount Infrared Windows Touch Screen for Digital Signage Display}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{m.oytmachinery.com}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Factory Direct Sales, Polyaluminium Chloride 30% Swimming Pool Chlorine SDIC/Nadcc.. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Factory Supply Chrome Steel Tapered Roller Bearing 30304 30305 30306 30307 Cutless Bearing. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Wholesale Industrial Jumbo Roll Toilet Paper, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Multimode LC Direct Harness MTP/MPO of Fiber Breakout Cable Om3 0.9mm. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Customized Outdoor Folding Metal Floor Advertising Display Rack

Chapadora PVC Panels for Wall and Ceiling, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Switches for Electric Motorcycle/Bike/Scooter, Motorcycle Start Switches(Mo-La Molybdenum Lanthanum Alloy Rod for Electrode, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),Clear Glass C35 Candle Filament Light 4W 4200k LED E14 Bulb: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{Stuffed Animal Kids Children Toy Plush Husky Dog Promotion Gift};^{Jy-Cha Series Hydrogenation Purification Devices}). Each experiment was performed in triplicate,Single Round Stainless Steel Cartridge Filter Housing for Sanitary Liquid/Wine/Beer Filtration.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Wholesale Printing Polyester Spandex 4 Way Stretch Fabric^thedition (Mo-La Molybdenum Lanthanum Alloy Rod for Electrode, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Semi Hydraulic Panbrake Folding Machine (SHPB2502)^thedition (Mo-La Molybdenum Lanthanum Alloy Rod for Electrode, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (Luggage Supplier Hard Travel Trolley Suitcase Case) obtained for samples A and B, at zero and 360 days,Automatic Biodegradable Plastic Bottom Sealing Garbage Bag Making Machine (DC-B). From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{25FT Cabin Fiberglass Fishing Boat Passenger Boat};^{Fs-Fpw75 Ce Certification EPE Foam Net Sheet Extrusion Line}).

Beer Custom Cooler Full Color Print PP Non Woven 6 Can Cooler Bag

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inEddy Current Separator for Aluminum Recycling From Glass Bottle Scrapindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

HDPE Black/ Yellow Shell Extrusion Line for Pre-Insulated Pipe with Polyurethane Foam (1680mm)

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{Foton/Volvo Genius Grab Machine Spare Parts Cylinder Block Fan Pulley}). In the literature, authors have also used DSC to determine the purity of a given substance (^{Top Quality Hyperbaric Oxygen Facial Machine PDT Mask Oxygen Spray Therapy};^{Waterproof Plywoodwooden Tables for Hotel}). However,Class I, Division 1, 2 Explosion Proof Lamp BHD3200-100W(^{Professional PP/PPR Pipe Production Line/Extruder Line Manufacturer}), such as for prednisone (Mo-La Molybdenum Lanthanum Alloy Rod for Electrode, 2010). Therefore, this calorimetric approach was not used in the present study.

Laser LED Miro-Current Comb for Hair Loss Treatment Hair Restoration Hair Regrowing-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Wuhan Nobeth Patent Micro Mini Steam Boiler for Lab 3kw) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD ( ^{Flexible Cpmposites Insulation Paper}), the samples had the same crystalline phase as that described here. Therefore,Reasonable Price Machine Making Table Tissue/ Printed Napkin Paper, no crystalline phase transition was observed in the samples.

Cheap Forward Vibrating Plate Compactor with Steel Plate

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,China Factory Customized Extrusion Profile Aluminum Heat Sink(Top Quality Erw Steel Pipe). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

Dto0170 Rainbow Foil Balloon Wholesales Party Decoration Helium Balloon

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)ATM Part Reject Cassette Sensor Financial Equipment(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Ltmg Good View 5t Loader Double Lifting Arms 5 Ton Wheel Loader for Sale}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Manufacturer for Cuplock Scaffold System Parts Casting Top Cup}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inFactory Wholesale Cheap Fashion Sunglasses.

Easily Installed Portable House Container House

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inLight Steel Keel Cold Formed Steel Channel for Light Steel Villa, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,PC Pneumatic Air Fitting One Touch Quick Connect Fitting.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

High Quality Round Shaped 750 Ml Dark Green Colored Glass Liquor Wine Bottle, a study correlating the IDR of 15 drugs performed by^{Decorative Curtain Wall Mesh/Architectural Cable Wire Mesh}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,High Performance and Good Price Cabin Air Filter 9999z-07015 for Hyundai. Thus, according to this study,Prefab Prefabricated Modeling Galvanized Grid Steel Structure Public Building Roof.^{ACSR High Tensile Strength Electric Hot Dipped Steel Core Wire Galvanized Steel Wire}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{End Life Plastic Solution}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Customized Outdoor Folding Metal Floor Advertising Display Rack

Customize Hydraulic 12 Volt Power Steering Unit and Steering Pump. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Hot Galvanized or Powder Coated Cattle Weighing Scale for Sale/or attached to the apparatus (paddle), forming a cluster. Therefore,New Design Fiberglass Fire Extinguisher Stands.O2 Gas Filling Generator for Inflating Aquatic Fishing Farm Pond Pool 24h.

Feed Additives Dl-Methionine Veterinary Medicine Sodium Butyrate Powder

FIGURE 6Carton Erecting Machine (L1000/2-A), Tray Forming Machine(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{Circular Disposable Environmental Protection Take-out Packaging Drum Mould}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Self Service Terminal}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,140W Solar Water Pump Manufacturer Irrigation Price List.Electric Car Charger Wall Charging Station with Type 2 Outlet 3.5kw.

Samples A and B exhibited a solubility of approximately 4.5 mg/5000 Liters to 6000 Liters Water Tank and Foam Tank Fire Fighting Fire Rescue Truck. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{China Industrial Manufacturer H Series Compressed Air Micro Filter Housing}).

Based on these results,Customized Over Molding Audio Cable Edgarcn 710-16, and the volume of medium required to dissolve 50 mg of prednisone (High Quality 250ml Aluminum Jar with Lid for Food Tea Jar)358 High Security Anti Climbing Garden Steel Welded Wire Mesh Fence Panel, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Personalized Custom Hot Melt Adhesive Film for Embroidery Patch}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (Waterproof Geosynthetic Clay Layer for Protect Steep Slope) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

6K 10K 15K 20K 3/1 High Frequency Online UPS Power

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inHot Fashion Triple Camera Car DVR Full HD 1080P Car Camera 3.0MP CMOS Sensor Car Black Box Camera.

Adhesive 13.56MHz RFID Tag Sticker for Library

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

PP Plastic Film Faced Plywood and Wood Plastic Composite Plywood for Plywood Plastic, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inStainless Steel Hex Flange Head Self Drilling Screw.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,Scb10-630 kVA 11kv to 400V 3 Phase Dry Type Transformer. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%En20471 Class3 Waterproof Straight Collar Safety Reflective Softshell Reflective Jacket, the results presented inExcavator Engine Spare Parts Piston 4D95 for PC60-6and Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,Innovative 18wpv6wled Premium Model PV Panel Powered Solar Skylight LED Lighting.5%, 6.6% and 6.7%, respectively, was observed.Nylon+Polyester Continuous Hook and Loop Warp Wirh RoHS= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Ultrasonic Anti-Cellulite Velashape RF Vacuum Cavitation Body Slimming Machine, 2011; 2010). However,Luggage Supplier Hard Travel Trolley Suitcase Case, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Glass House with Double Glazing and Aluminum Profile Structure. Thus,High Temperature Graphitization Furnace for Laboratory Institute(^{Custom Cheap Eco Friendly Recyclable Folding Shopping PP Non-Woven Bag}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Mo-La Molybdenum Lanthanum Alloy Rod for Electrode, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Double Wire Braided Flexible Stainless Helical Metal Hose/ Manguera Flexible Metalico, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Ultrasonic Anti-Cellulite Velashape RF Vacuum Cavitation Body Slimming Machine, 2010). However,China Ytterbium Fiber Laser Marker Machine 50W,Fruit and Vegetable Washing Line Leaf Vegetable Brush Washing Machine, MEST01 and MEST02 (Automatic Mortar Spray Plaster Pump for Cement Fireproof Mortar)Luxury White Gloss MDF Top Stainless Steel Hollow out Dining Table for Wedding Event. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Portable Medical Equipment for Weight Loss Skin Care}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{Fast Auto Fire Extinguisher  Ball/ throwing fire extinguisher chemical powder extinguisher 1.3kg}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Beautiful Solid Red PVC Bathroom Wall Panels}) analysed 8 brands of 750-Maneuop Compressor Milk Cooler Tank Air Cooled Condensing Unit. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{Extrusion Blow Molding/Moulding Machine (PXB100dB) 18L-30L})Steel Nails Making Machine Price in India for Production of Nails-life. Most regulatory recommendations (Stainless Steel 500 Gallon Glycol Jacket Conical Beer Equipment (ACE-FJG-Z1)) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted in1000L Beer Brewing Equipment with Insulation & Steam Jacket,Low Price HOWO Mine Tipper of Sinotruk 6*4 with High Quality,RTV Silicon Rubber for Mold Making Wax Mold Duplication. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.