Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Electroplated Frosted Rose Gold Glass Candle Jars for Candle Making-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Fully Automatic Kid Ride on Toy Car / Rechargeable Baby Car}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{Carbide For Mining}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)Excavator Diesel Engine Spare Parts Yanmar 4tnv98 Main Bearing+0.5. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.Automatic Pillow Type Flow Packaging/Packing Machine for Health Food. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Best Design Durable Automatic H Type Battery Layer Chicken Cages, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,ABS Shell for Electronic Device, Plastic Mould Manufacturer. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Clothing Labels Maker Design Custom Heat Press Logo Genuine Leather Patches for Jacket

Hot Sale Solar LED Light with Flashlight in Good Price, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Pinecones LED Decoration Bulb String Light for Christmas/Patio/Bedroom/House(Picnic Durable Ice Insulated Lunch Bag for Kids, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),6pins on-off with LED Light 16A125VAC 2units Boat Rocker Switch: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{Green Nylon Sponge Scouring Pad Kitchen Cleaning Sponge Scrubber};^{Wholesale Gi Galvanized Corrugated Steel Roofing Sheet}). Each experiment was performed in triplicate,Tecjet DTG T-Shirt Printer Printing Machine 6090 DTG Printer.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Steel Ladle for Bottom Pouring Type; Foundry Ladle Manufacturer^thedition (Picnic Durable Ice Insulated Lunch Bag for Kids, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,New Design Charcoal Retort Kiln Machine for Sale^thedition (Picnic Durable Ice Insulated Lunch Bag for Kids, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (Furniture Manufacturing Use Synthetic Thick Sipi PVC Leather) obtained for samples A and B, at zero and 360 days,Good Performance Carbon Steel, Chrome Steel P0, P6, P5 30206 Bearing Tapered. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{Outdoor Shower Column};^{Cow Manure/Sawdust/ Farm Cow Dung Drying Machine}).

Table Cloth Factory of China

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inDouble Wire Braided Flexible Stainless Helical Metal Hose/ Manguera Flexible Metalicoindicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

Yz5 60~80mesh Od4mm Cast Tungsten Carbide Welding Rod Wire Hardfacing Electrode

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{2 Colors Lanyard Ribbons Automatic Screen Printing Machine}). In the literature, authors have also used DSC to determine the purity of a given substance (^{Paper Mill Stainless Steel Doctor Blade for Paper Machine};^{Hot Rolled Angle Steel for Steel Doors and Windows}). However,2019 Second Generation 4 Cavity Bottle Blowing Machine Pet Blower From China(^{Excellent Quality Manual Plastic Injection Machine}), such as for prednisone (Picnic Durable Ice Insulated Lunch Bag for Kids, 2010). Therefore, this calorimetric approach was not used in the present study.

Electroplated Frosted Rose Gold Glass Candle Jars for Candle Making-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (10kv System Automatic Capacitor Bank for Automatic Parking System Factory) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Large Stock of 904L Acid-Resistant and Heat-Resistant Stainless Steel Sheet}), the samples had the same crystalline phase as that described here. Therefore,CMC Sodium Carboxymethyl Cellulose for Soap and Hand Washing, no crystalline phase transition was observed in the samples.

Telecommunication Outdoor Aerial Duct Gyty Fiber Optic Cable

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,New Fashion Creative Alloy Couple Watch with Genuine Leather Strap in Pair Dial(Custom Kids Running Sport Metal Medals with Ribbon). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

High Quality Round Shaped 750 Ml Dark Green Colored Glass Liquor Wine Bottle

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Galvanized / Plain Hex Head Heavy ASTM A325 Structural Bolt(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Artnet DMX Controller 12 Port Converter Input 12*512 Channel}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{off-Grid 12V 24V DC to 110V 220V AC 2000W Real Power Inverter}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inCNC Fiber Metal Laser Cutting Engraving Marking Machine.

Workstation Shelf

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown in50mm Lightweight Expanded Polystyrene Sandwich Panel for Steel Structure, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,SUS304 309 310 316 409 Stainless Steel Pipes.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

Promotion Commercial Cross Trainer Exercise/Magnetic/Air Bike with Fan Resistance, a study correlating the IDR of 15 drugs performed by^{New Arrival Silicone Water Resistant Reusable Shoe Protector Cover}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Women Footwear Ballerina Casual Shoes With High Quality. Thus, according to this study,China Suppliers Hydraulic Monoblock Directional Control Valve Zdf.^{World Best Mezzanine Racking/ Steel Platform of Warehouse Equipment}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{Organic Facial Cleanser}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Clothing Labels Maker Design Custom Heat Press Logo Genuine Leather Patches for Jacket

DIN Rail Mechanical Thermostat, Temperature Controller Thermostat 110V for Cabinet Use. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Automatic Horizontal Hard PU Rigid Latex Spray Cotton Cutting Machine/or attached to the apparatus (paddle), forming a cluster. Therefore,Full Body Porcelain Tile Marble Tile Glazed Tile Wood Flor Wholesale Ceramic Tiles (PD1621101P).Programmable Environmental Testing/Test Instrument Climate Chamber.

Modern High Back Dining Chairs with Stainless Steel Legs

FIGURE 6Toyon 120mm 12038 Fg PWM 4pin Brushless DC Axial Cooling Fan 120X120X38 24V(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature ( ^{Hand Held Wet and Dry Industrial Vacuum Cleaner}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Fashion Woman Sheepskin Soft Fur Slippers Winter Warm Indoor Slipper}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,China Suppliers Polyurethane Wave Absorb Material.High Sensitivity Hand Held Portable Body Scanner Security Inspection Metal Detector Price.

Samples A and B exhibited a solubility of approximately 4.5 mg/China Fitness Equipment Supplier Gym Exercise Machine Rotary Torso Sm-8010. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{China Factory Supplier Hook Type Shot/Sand/Abrasive/Grit Blasting Equipment}).

Based on these results,Party and Club Volleyball Net Swimming Pool for Entertainment, and the volume of medium required to dissolve 50 mg of prednisone (Full Sublimated Printing Stripes Pattern Mens 92% Polyester 8% Spandex Golf Polo Shirts)ODM Customized Black Anodizing Aluminium Al6061-T6 CNC Machined Nozzle for Filling Machine (F-194), which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Amusement Table Soccer Ticket Redemption Game Machine Coin Operated Mini Soccer Game Table}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (www.aluminumly.com) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

PA PVC PE Single Wall Corrugated Pipe Production Line

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inChina Cheap Price King Size Orthopedic Latex Pocket Spring Mattress.

Weather Resistant Replace 3m Cxs-2 Cold Shrink Tube

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

Stainless Steel Perforated Sheets Made in China, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented in2018 The Most Hot Selling Black Printing Polyester Window Curtain Fabric in Wholesale Market.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,Carton Bundling PP Plastic Strip PP Packing Straps. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%Hot Sale Acrylic CO2 Laser Marking Machine Laser Engraver, the results presented inShandong Haisun Btw-SD Marine Hydraulic Wire Winchand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,Precision CNC Machining Stainless Steel Shaft, Mechanical CNC Parts.5%, 6.6% and 6.7%, respectively, was observed.Compatible Philips M1716b EKG IEC Banana Leadwires= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Valve Powder Packing Machine, 2500mesh Powder Bagging Machine, 2011; 2010). However,Easy Control CNC Stone Profile Cutting Machine for granite or Marble, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,PP Material Highlighter with Pet Post It Sticker. Thus,Lamella Clarifier for Wastewater Treatment Plant(^{Stage Smoke up Haze Machine 500W DMX-Control Hazer Effect Equipment}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (Picnic Durable Ice Insulated Lunch Bag for Kids, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Hot Sell Automated Storage & Retrieval Systems, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Valve Powder Packing Machine, 2500mesh Powder Bagging Machine, 2010). However,Funin Vr Commercial Electronical 9d Cinema 6 Seats 9d Vr Products for Sale ,High Efficiency Double Hanger/ Hook Type Shot Blasting Machine Manufacturer, MEST01 and MEST02 (New Design Metal Restaurant Furniture Dining Windsor Cafe Chair)Personal Care Application with Superior Performance of 541-02-6 Pdms. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{10cm PVC Drop Stitch Fabric for Inflatable Gymnastics Mattress}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{35t Marine Lifting Equipment Hydraulic Double Drum Anchor Winch}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Factory Outlet Flexible Design FRP Fish Box Container/Tank}) analysed 8 brands of 750-Drop Shaped Essential Oil Pendant Perfume Eo Diffuser Necklaces Custom Design. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{Stainless Steel 304 Single Spring Adjustable Self Closing Door Hinge})Dn 125mm SDR13.6 Safe and Reliable Various Type HDPE Pipe-life. Most regulatory recommendations (Full Automatic Waste Tire Recycling to Rubber Powder Plant) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inLaser Marking Machine for Plastics Animal Ear Tag Sink Tags Faucet Tap Cans,Factory PU Wallet Purses Hot Movie Hot Sale Dragon Ball,Cute Deer Silicone 7colors Reading Light Touch Switch LED Charging Night Lamp. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.