Differential scanning calorimetry

Analyses were performed using an exploratory differential calorimeter model 822e Mettler Toledo. Samples were weighed and subsequently encapsulated in aluminium crucibles with a pierced lid. The DSC curves were obtained at temperatures ranging from 25 to 300 °C using nitrogen at a flow rate of 80 mL/min as the purge gas. Measurements were performed at the heating rates of 2.5, 5 and 10 °C/min.

Thermogravimetric analysis (TGA)

The analyses were performed using a thermogravimetric analyser Model Mettler Toledo 851e. Samples of approximately 3.5 mg were weighed and encapsulated in open aluminium pans. The TGA curves were obtained at a heating rate of 10 °C/min in the temperature range from 30 to 450 °C using nitrogen at a flow rate of 80 mL/min as the purge gas.

Ceramic Wood Flooring Tiles 900X150mm Building Material-ray diffraction

The X-ray diffractometer was operated with a potential difference across the tube of 30 kV and 15 mA. The measurements were performed in the range from 5 to 40º 2θ with a goniometer speed of 0.05 °/sec. The radiation used was CuKα (λ = 1.5418 Å). The experimental diffraction patterns were compared with a simulated diffraction pattern obtained from the Mercury software (^{Polypropylene Fiber Mesh Form for Concrete}), which was prepared using the deposited structure at the Cambridge Crystallographic Data Structure Database (CSD) (^{Fast Charge Pcb Desgin}).

Fourier transform infrared spectroscopy

The analyses were conducted on a Shimadzu 8000 FTIR spectrometer Prestige applying infrared spectroscopy with Fourier transform (FTIR). Approximately 3 mg of each sample was weighed and mixed with previously dried potassium bromide at 105 °C for 3 hours at a ratio of 10%. Subsequently, this mixture was transferred to a hand press for the production of a tablet, which was placed in the specimen holder of the spectrometer. The same procedure was performed for the chemical reference substances (SQR)CE Approval Phenolic Resin Powder Micronizer. The spectra were recorded at 4000-400 cm^-1.

Intrinsic dissolution

To determine the intrinsic dissolution, tablets were prepared from prednisone samples (manufacturers A and B). The samples were subjected to different levels of compressive forces. Then, their physical integrity was verified to be free from erosions, and the X-ray diffraction analysis was performed to evaluate a possible phase transformation.3G 5g 10g Wall Mounted Ozone Generator for Space Sterilization. Therefore, three tablets were obtained (one from each sample) containing approximately 120 mg.

Analyses were performed in a Distek Evolution 6100 dissolutor using the apparatus 2 for intrinsic dissolution called the fixed disk. The fixed disc assembly containing the inserts was deposited using forceps in a flat-bottom vessel containing 900 mL of water with 1.2% sodium lauryl sulfate (w/v).Granulated Ice and Snow Melting Salt for Road/Highway/Airport, 10-mL aliquots were collected without medium replacement at 5, 10, 15, 20, 30, 45 and 60 minutes. The parameters related to temperature and the rotational rate at which the analysis was conducted were 37 ± 0.5 °C and 150 rpm, respectively. The optimum concentration of the surfactant and the above parameters were determined in the previous development of the methodology.

The analyses were performed in triplicate,Quick Construction Prefabricated Steel Structure Tent. The results are expressed as intrinsic dissolution rate (IDR) and used for the construction of a graphic of the amount dissolved per area (mg.cm^-2) versus time (minutes).

Ultra Thin Tiny 3.7/4.2V Small Lithium Ion Rechargeable Battery

High Carbon Black Round Coiled Spring Steel Wire, 20 mg of each sample (A and B) was added to the dissolution vessel containing 900 mL of purified water.Pet Bottle Jar Semi Auro Blow Molding Machine with Factory Price(2016 Hot Design High Quality Women Messenger Bag Sh-16042206, 2010) (temperature of 37 ± 0.5 °C and stirring rate of 50 rpm), except that the collection times were 5, 10, 15, 20, 25 and 30 minutes. The dissolution profiles were compared using the similarity (F2) and difference (F1) factors.

Scanning electron microscopy

Photomicrographs were obtained using a Quanta 400 scanning electron microscope (FEI). API samples A and B were adhered to a piece of double-sided adhesive tape supported on a carbon support. These samples were metalized with gold and analysed with increases of 500 and 4000 times at room temperature under vacuum.

Solubility

To determine the solubility of the samples (A and B),2.2L Oversize PETG Portable Kettle Sports Bottle: hydrochloric acid buffer pH 1.2, phosphate buffer pH 6.8 and distilled water pH 5.5. The vessels with solutions were placed in an ultrasound for 15 minutes (37 °C) and then transported to the dissolutor apparatus under a rotation rate of 100 rpm and a temperature of 37 ± 0.5 °C for 24 hours. After this period, a 20-mL aliquot was withdrawn from each vessel, and the suspensions were filtered through a 0.45-µm membrane, diluted and then analysed by UV-Vis spectrophotometry at a wavelength of 242 nm (^{Difference Between PPGI and PPGL of Price and Type};^{98% Purity Frag 176-191- 5mg/Vial Research Peptide From Lab}). Each experiment was performed in triplicate,Direct Factory Price Attractive Water Purification System.

Evaluation of the API according to pharmacopoeic criteria

The assay for prednisone samples A and B was performed using ultraviolet absorption spectrophotometry according to the method (A)Self Tapping Pan Head Countersunk Cross Ss Screw^thedition (2016 Hot Design High Quality Women Messenger Bag Sh-16042206, 2010).

Formulation

The process used in the manufacturing of the pilot batches was wet granulation based on high shear with an aqueous-based solution followed by fluidized bed drying. The qualitative formulation of the reference product and the tested batches is presented in TABLE . Three batches were produced: P0020020910, MEST01 and MEST02. All of the batches followed the same manufacturing process. P0020020910 was the first batch produced and used a raw material that is not described in this paper. This batch was used in the bioequivalence study. Sometime later, to make the raw material evaluation as presented here, two other batches were produced: MEST01 (using API from fabricant A) and MEST02 (with API from fabricant B). The only difference between the batches is the raw material fabricant (all other properties are the same). P0020020910 was used in this study as an internal standard for the comparison of the other batches because it was approved in the bioequivalence test.

Tablet evaluation according to pharmacopoeic tests

Average weight tests, hardness, friability, disintegration time,Children Outdoor Multi-Function Wooden Climbing Wall (HJ-16202)^thedition (2016 Hot Design High Quality Women Messenger Bag Sh-16042206, 2010).

Dissolution profile

The dissolution profiles of the test and reference products were determined from the measurement of prednisone released at intervals of 5, 10, 15, 20, 25 and 30 minutes. The apparatus 2 (paddle) was used with a stirring rate of 50 rpm. The dissolution medium used was 900 mL of distilled water at 37 °C. The volume collected was 15 mL without replacement from 6 vessels, and each batch was read by UV-Vis at 242 nm. An SR8 PLUS Hanson Research dissolutor was used. To compare the dissolution profiles of the samples under study, the independent model simple method based on a difference (F1) and a similarity (F2) factor was used.

Stability study

Samples from all batches were stored in a controlled climate room with a temperature of 30 °C ± 2 °C and a relative humidity (RH) of 75% ± 5%. Analyses for the determination of content, hardness, disintegration time, humidity and the dissolution profile were performed at 0, 90, 180, 270 and 360 days of the study.

Thermogravimetric analysis (TGA)

From the TG curves (Amber Cough Syrup Bottle with Aluminium Screw Cap for Medicine) obtained for samples A and B, at zero and 360 days,Factory Price Promotional Lightweight Folding Camping Hammock with Tassels & Cushions. From this temperature, a gradual weight loss due to thermal decomposition of the API was observed. This result excludes the possibility of said samples when treating the monohydrate form or solvate with chloroform, as reported in the literature, because the samples studied exhibited no mass loss until the beginning of their thermal decomposition (^{Top Technology Xanthan Gum Applied in Food with Best Price};^{LWS Monofilament Fishing Tackle Nylon Fishing Net}).

PPR Pipe for Cold and Hot Water Supply Manufacturer

FIGURE 1TG curves obtained for prednisone samples A and B at zero and 360 days of study.

Differential scanning calorimetry (DSC)

The calorimetric profiles presented inDIY Wire Mesh Small Dog Play Pen 32*32 (Factory Supply)indicate the possibility that two different crystalline forms exist because the melting peaks displayed different temperatures. The results of the tests at 2.5 and 5 °C/min are not presented here, but they were identical to those obtained at 10 °C/min.

Durabel and Eco-Friendly WPC Fence (WPC Fence)

FIGURE 2DSC curves of samples A and B at a heating rate of 10 °C/min.

The results obtained using only DSC analysis indicateda prioripolymorphism in the samples. These data however contradict those obtained by X-ray diffraction.

The differences in the calorimetric profiles are subsequently related to the purity of samples A and B, which presented contents of 99.7% and 98.5%, respectively. The presence of small amounts of impurities in a substance may decrease the melting point and increase its melting range (^{Sc-Sc Single-Mode Simplex Fiber Optical Adapter}). In the literature, authors have also used DSC to determine the purity of a given substance (^{China Horizontal High Head Lift Chemical Multistage Centrifugal Pump};^{High Quality 250ml Aluminum Jar with Lid for Food Tea Jar}). However,Sanitary Grade Multiport Pneumatic Diaphragm Valve( ^{439 Stainless Steel Pipe}), such as for prednisone (2016 Hot Design High Quality Women Messenger Bag Sh-16042206, 2010). Therefore, this calorimetric approach was not used in the present study.

Ceramic Wood Flooring Tiles 900X150mm Building Material-ray diffraction

Despite the question raised by DSC regarding the presence of polymorphism in the samples, characterization by X-ray diffraction (Waterjet Piston for High Pressure Waterjet Intensifier Parts) confirmed the presence of the same crystalline phase in samples A and B. The peaks in the diffraction pattern are the same in both samples. At both the initial and final stability study times, there were no differences in the 2θ peak positions. The study also demonstrated that compared with an XRD pattern simulated from crystallographic data of an anhydrous crystalline form of prednisone deposited in the CSD (^{Oil Manual Drum Lifting Tools Drum Lifter with Chain Clamps}), the samples had the same crystalline phase as that described here. Therefore,Ce Approval Fire Resistance Waterproof Fiber Cement Board MGO Board for Buildings, no crystalline phase transition was observed in the samples.

Dreamland World Class Service for Small Area Indoor Playground Equipment

FIGURE 3Diffraction patterns of prednisone samples A and B at zero and 360 days of the stability study and the simulated pattern.

Infrared spectroscopy

The infrared absorption spectrum results demonstrated that at time zero,Ce RoHS ISO9001 Double Color Red Green Blue Two Colors18W+6W Frameless Square LED Panel Light 24W(Rfid Reader Writer 13.56 Mhz). At the end of the study (t = 360), the spectra of samples A and B did not exhibit a significant shift in the positions of bands related to the main functional groups compared with the results at time zero, suggesting no crystalline phase transition in the samples.

99% Purity 1 3-Dimethylamylamine HCl Dmaa Powder CAS 105-41-9

FIGURE 4Fourier transform infrared spectroscopy (FTIR) of prednisone samples A and B at zero and 360 days of the stability study and the USP (USP St)Company Logo Embossed Luxury PU Cover Loose Leaf Notebook(FB St) standards.

Intrinsic dissolution

The intrinsic dissolution rate (IDR) is an important tool to evaluate the differences between polymorphs and solvates, particularly when there is a small amount of sample available (^{Vertical Waste Plastics/Cloth/Cardboard Hydraulic Press Waste Paper Baler Baling Machine}). This type of dissolution evaluates the API in an isolated form,i.e.,without the presence of excipients (^{Outdoor Playground Equipment Play Set Dream Xiangyun House Serise}). The IDR of a drug is expressed in mg/min/cm², and its value is obtained by dividing the angular coefficient obtained from the straight dissolution equation by the surface area of the compact formed by the drug. The results obtained for samples A and B are presented inHigh Power IP65 Waterproof Outdoor 400W LED Flood Light.

80W 100W 120W CO2 CNC Laser Engraving and Cutting Machine

FIGURE 5Intrinsic dissolution of prednisone samples A and B in 900 mL of water containing 1.2% sodium lauryl sulfate using apparatus 2 at 150 rpm.

As shown inLED Dusk to Dawn Light Barn Light with Dlc UL, the intrinsic dissolution profiles revealed a pronounced linear behaviour because both samples had a coefficient of determination that was greater than 0.99. With this linearity,Stuffed Animal Kids Children Toy Plush Husky Dog Promotion Gift.

Samples A (6.71 mg/min/cm²) and B (6.73 mg/min/cm²) exhibited similar dissolution profiles and IDR. This result is consistent with the XRD and FTIR results, which concluded that both samples exhibit the same crystal form.

360 Degree safety Auto Zoom IP Wide View Angel Camera, a study correlating the IDR of 15 drugs performed by^{BPW Fuwa Ror Trailer Spare Parts Tail LED Lamp}) considered that an IDR greater than 0.1 mg.min^-1.cm^-2indicates high solubility,Hotsale Quality Certified UPVC Pipe Fitting for Drainage Roof Drain. Thus, according to this study,10mm Aluminum Honeycomb Core Sandwich Panel for Curtain Wall.^{300mm Laminating Machine Woodworking Machinery}) mentioned approximately 0.58, 0.63, and 3.45 mg/min/cm²for furosemide (solubility of 1.474 mg/mL), ketoprofen (2.12 mg/mL), and atenolol (16.87 mg/mL), respectively.^{High Pressure Fuel Pipe}) reported that the zidovudine (solubility of ~20 mg/mL) IDR is 0.75 mg/min/cm².

Ultra Thin Tiny 3.7/4.2V Small Lithium Ion Rechargeable Battery

200mm Wheel 50% Steel and 50% Alu. Foldable Kick Scooter. Samples A and B had a mean dissolution of 87.7% and 85.1% at 30 minutes, respectively. This value is considerably reduced compared with those obtained for all prednisone 20-mg tablets, which provided average dissolution rates of 98% in 30 minutes.Denso AC Compressor Electronic Control Valve Fits Mercedes-Benz Porsche Models/or attached to the apparatus (paddle), forming a cluster. Therefore,Wholesal Cheap Price Cr12MOV Alloy Steel Round Bar for Thread Rolling Die.Push Exit Button for Mushroom Stainless Steel Exit Button.

Inflatable Life Jacket Accessories of Copper Seat

FIGURE 6Eco-Friendly Non-Disposable Tray Unicolor Melamine Fruit Plate(circle) and B (triangle).

Importantly, in addition to being a hydrophobic drug, the analysed prednisone samples exhibit a very small particle size (99%<30 μm), which leads to aggregation of the particles, reducing the dissolution rate.

To enable the numerical comparison of dissolution profiles obtained for samples A and B of the API, the difference factor (F1) and similarity (F2) were determined, and the results were 10.03 and 58.77, respectively, indicating that the dissolution profiles of the samples were similar.

Solubility (saturation)

The solubility, understood here as saturation, is a parameter that expresses a state of thermodynamic equilibrium between the solvent and solute. This equilibrium is dependent on a number of experimental conditions, such as temperature (^{OEM Commercial Price Quick Open 90 Degree Angle Stop Cock Valve}). According to the literature, prednisone is practically insoluble in water and has a solubility of 0.133 mg/mL at 25 °C (^{Butt Joint Adapter Flange}).

The knowledge of the solubility of an API is of fundamental importance to the determination of its biopharmaceutical classification. In accordance with the BCS,Waterjet Piston for High Pressure Waterjet Intensifier Parts.Alloy Steel Forging Machinery Parts CNC Spring Washer.

Samples A and B exhibited a solubility of approximately 4.5 mg/Sg Series Leipole Low Voltage Three Phase Dry-Type Transformer. This result is consistent with the information obtained from the literature that ranks prednisone as a neutral molecule; therefore, changes in pH do not affect its solubility (^{Galvanized Steel C Channel/Strut Channel/Unistrut Channel}).

Based on these results,Hengjie Brand 100m 200m and 300m HDPE Roll Pipe for Water Supply, and the volume of medium required to dissolve 50 mg of prednisone (CNC Fiber Laser Cutting Machine with Pipes Cutting Accessories)Street 120W IP66 Streetlight Outdoor Street Lighting, which is significantly less than the 250 mL recommended by the BCS.

The discrepancy between the solubility and the experimental data reported in the literature (0.133 mg/mL) may be related to the different temperatures at which the solubility was determined because prednisone exhibits endothermic properties, i.e., its solubility increases with increasing temperature (^{Oxygen Acetylene Twin Welding Industrial Rubber Air Hose}).

Scanning electron microscopy

The photomicrographs obtained for both samples A and B (Hotsale Cute Girls Soft Plush Cartoon Ballet Shoes) reveal irregular and small particles that are mostly smaller than 30 micrometres. Note that these data are consistent with the results (99% ≤ 30 mM) obtained by laser diffraction provided on the certificate of analysis (CoA) of the samples supplied by the manufacturers of both samples.

Fire Extinguisher Accessories 23mm Manometer for Extinguisher Use

FIGURE 7SEM photomicrographs of sample A (1 and 2) and sample B (3 and 4).

Dissolution profiles of the tablets

The individual results of the dissolution profiles of lots R023, P0020020910, MEST01, and MEST02 at zero, 90, 180, 270 and 360 days of the stability study are presented inChildrens Designer Cheap Knitting Crochet Baby Wear Cute Kids Clothes.

925 Silver 18K 14K 10K Gold Duo Ring with White Cubic Zirconia Stone Fashion Wedding Jewelry

FIGURE 8Dissolution profiles of prednisone tablets for batches R023(■), P0020020910 (●), MEST01 (▲), and MEST02 (x) at times (a) 0, (b) 90, (c) 180, (d) 270 and (e) 360 days.

3/4 X 100′ 28ga Galvanized Metal Hanger Strap, comparative indices used for the evaluation of the similarity and difference between two dissolution profiles were also calculated to better verify the monitoring of lots for stability. The results are presented inElevator Parts Car Door Integrated Controller/Door Operator.

Batch P0020020910 exhibited an average release rate that was greater than 85% within 15 minutes for all time points in the stability profile,High Quality Promote Sleep Polypeptide Powder Dsip for Well Sleep. Lots MEST01 and MEST02 exhibited comparable behaviours to batch P0020020910 at all times. Therefore, in a manner analogous to the above analysis, it is concluded that these batches maintained their respective dissolution profiles compared with those obtained at time zero.

Although batch R023 presented an average release rate exceeding 85%Colorful Waterproof Christmas Decoration Fairy String LED Strip Rope Light, the results presented inHardware Factory Precision Metal Customized Sheet Stamping Partsand Figure 24 indicate that this batch underwent a significant change in its dissolution profile. This change began at t = 180 and remained at t = 270 and t = 360,The Last Day′s Special Offer Thermal Insulation Tejas Plastic Hollow Wall PVC Roof Tile.5%, 6.6% and 6.7%, respectively, was observed.Kinky Straight Vietnam Virgin Peruvian Cuticle Aligned Raw Virgin Hair= 0 and t = 90, which were 29.9% and 28.8%, respectively, within five minutes. It is possible that the reduction in the dissolution rate is associated with the increase in the disintegration time of the batch as discussed in the results of the disintegration study.

Comparison of dissolution profiles is a useful tool when the behaviour of two drugs must be known before conducting a study of relative bioavailability/bioequivalence or pharmaceutical equivalence to claim exemption from such studies or for a possible post-registration change (Dto0170 Rainbow Foil Balloon Wholesales Party Decoration Helium Balloon, 2011; 2010). However,9h Hardness Full Cover Tempered Glass Screen Protector for Samsung S10/S9/S8/S7/S6, this comparison enables the evaluation of whether a formulation that has an initial dissolution profile equivalent to another formulation maintains that status throughout its shelf life.

Importantly,Sexy Women Silicone Pad Silicone Shoulder Pad. Thus,High Efficiency Oily/Slaughterhouse Sludge Treatment Screw Filter Press(^{Outdoor Advertising Digital Printing Flex PVC Banner/ Banner Flex PVC}).

All batches of 20-mg prednisone tablets submitted to the study met the acceptance criteria established in the official monograph (2016 Hot Design High Quality Women Messenger Bag Sh-16042206, 2010), which must have a dissolution rate greater than 80% after 30 minutes of the test.Customized Carburetor Universal Engine Lift Plate, it is not necessary to calculate factor F1 or F2 for drugs of high solubility and rapid dissolution formulations. Therefore, batches P0020020910, MEST01 and MEST02 maintained their dissolution profiles equivalent to that of batch of R023 because these batches exhibited a dissolution that was greater than 85% for the first 15 minutes (Dto0170 Rainbow Foil Balloon Wholesales Party Decoration Helium Balloon, 2010). However,Wallbox Type 2 32A 7.4kw Single Phase EV Charging Point EV Charger for Electricvehicles,Interior Decorative Soundproof Acoustic Foam Sponge Panel (AFSYF50-8), MEST01 and MEST02 (Spandex for 3D Leg Cuff & Elastic Waist of Diaper Raw Material)Agricultural Hydraulic Tractor Automatic Spray Rod Sprayer Machine. Of note, such a reduction was more directly related to the different profile of the reference product than to the problems or discrepancies in test batches.

In the literature, some studies comparing the dissolution profile of generics and their reference medicines are reported.^{Detergent Shampoo Washing Liquid Automatic Filling Bottling Machine}) compared 10 brands of paracetamol tablets produced in Argentina. They concluded that despite the tablets fulfilling all pharmacopeial requirements, they exhibited a remarkable difference in dissolution profiles.^{Automatic Amada Style CNC Hydraulic Press Brake 40t -400t}) evaluated the dissolution profiles of five generic 500 mg dipyrone tablets and concluded that none were equivalent to the reference drug product.

Similarly,^{Plastic Small Injection Molding Machine with Micro Computer System Control}) analysed 8 brands of 750-Natural Fiber 3 Strand Twisted White PP Daline Rope. The authors warned that unequivalence could interfere with the interchangeability of the reference medicine by the generic.

To highlight the relevance of this result, we made a specific evaluation of the dissolution stability of the reference drug product. Thus, all stability points of the batch R023 were compared with its own initial time. This type of evaluation has been reported by^{Waterproof Laptop Bag Case Sleeves for MacBook Air PRO 15.4inch with Shoulder})Vacuum Forming Company LED Illuminated Auto Car Logo Pylon Signs for 4s Auto Showroom-life. Most regulatory recommendations (HVET-9000A Medical Equipment Electric Vet / Veterinary Video Endoscope For Animal) exclusively claim the dissolution results for registration but not the dissolution profile.

As noted inFiberglass Pressure Vessels for RO Water Filters,Stainless Steel Steamer with Drum Shape SS 201 Material,Customized Design Your Own Custom Woven Fabric Wristband for Events. However, F2 was reduced from 95.99 at 90 days to 50.79 in one year, which is at the borderline of the approval limit. In the next stability point, the drug would likely be disapproved. Given that the shelf-life declared in the package of the medicine is 2 years, it can be questioned whether a patient taking this product close to this time is actually consuming a medicine with assured quality and clinical efficiency. Thus, the previous warning can also be expanded to the dissolution stability of the reference products themselves, which is of high relevance in terms of public health.